Epoxy and Polyester RESINS, HARDENERS AND GELCOATS

Showing 49-72 of 131 item(s)

Foaming SYSTEM 5 for hockey stick repair, component B

111248

Component B is a hardener (diethylenetriamine) for a foaming system. Component A is an epoxy resin with black fillers, suitable for foaming. Mix components A and C (100 g : 3 g), then add component B (6 g).

Kč383.91

Foaming SYSTEM 5 for hockey stick repair, component C

111249

Component C is a foaming agent for an epoxy resin system. Mix components A (100 g) and C (3 g) before adding hardener B (6 g). Achieves a density of 200 kg/m3 and excellent mechanical and thermal properties. Cures in 1-2 hours with a pot life of 15-30 minutes. Recommended for creating hard foam in amounts up to 200 grams.

Kč2,934.86

-Kč97.83

Hardener 500 MGS

001024

Hardener for epoxy resin 285 with a mixing ratio of 100:40 by weight and 100:50 by volume. Processing time is 10-15 min at 20°C. Suitable for fast curing at low temperatures from +10°C.

Kč1,043.50 Kč1,141.33

Time left

-Kč127.47

Hardener F 250 /MGS/

001057

Hardener F 200 for molding resin with a mixing ratio of 100:25. Processing time is 15-20 min at 25°C, with a gel time of 1-2 h and curing time of 24 h. Suitable for molds without heat resistance.

Kč764.84 Kč892.31

Time left

Havel Adhesive G 40 sl. B 30

eshop_111121

Havel Adhesive G 40 (A5 + B30) is an epoxy adhesive system suitable for bonding laminate parts at 10 - 30°C. For optimal curing, temper for 4.5 hours at 45 - 60°C. Recommended hardener B 30 in a 100:17 weight ratio. Working time: 30-40 minutes.

Kč1,019.89

Havel Adhesive G 40 sl.A 5

eshop_111120

Structural adhesive for bonding laminate and wooden parts, suitable for polyester resin. Ideal for imprecise parts needing gap filling. High viscosity, processing time 20-40 minutes. Mix ratios: B 20 (100:13 +/- 2g), B 30 (100:17 +/- 2g). Curing can be accelerated at 40-60°C.

Kč1,182.26

HAVELcell E1 složka A

eshop_111101

HAVELcell E1 is a lightweight epoxy foam (550 kg/m3) ideal for sandwich constructions and boat manufacturing. Coated with fiberglass, it is lighter than water. Use with HAVELcell E1 hardener (100:35 ratio) and has a processing time of 30 minutes.

Kč860.16

HAVELcell E1 složka B

eshop_111102

HAVELcell E1 component B is a hardener for curing epoxy foam HAVELcell E1 component A at a 100:35 weight ratio.

Kč1,169.82

HAVELcell P1 - Polyesterová pěna pro výrobu sendviče

eshop_111100

Reinforced white foam based on orthophthalic polyester resin, thixotropic and non-running, suitable for sandwich structures. Reduces product costs and speeds up production by up to 40%. Lower peroxide consumption and styrene evaporation. Ideal for boat manufacturing, floats even when submerged. Apply with brush or special equipment for best results. Bulk...

Kč349.19

Havelgelcoat 65 - polyesterový bílý - natírací

eshop_000040/26

Havelgelcoat 65 is a pre-accelerated isophthalic gelcoat for mold application, suitable for marine, construction, and transportation industries. It offers excellent water and weather resistance. Activate with Butanox M50 (1-3%).

Kč511.85

Havelgelcoat 65 - polyesterový čirý - natírací

eshop_000040/55

Havelgelcoat 65 is a pre-accelerated isophthalic gelcoat for mold application, suitable for marine, construction, and transportation industries. It offers excellent resistance to water and weathering. Activate with Butanox M50 (1-3%).

Kč541.72

Havelgelcoat 97 - polyesterový čirý - natírací

eshop_000040/28

Havelgelcoat 97 is a pre-accelerated isophthalic gelcoat for mold application, offering excellent adhesion to epoxy resins and pre-pregs. Suitable for brush application and available in various colors, it is designed for both wet layup and vacuum infusion systems.

Kč497.79

HAVELinhibit 1

eshop_100022

Material for extending gel-time, ideal for large or complex polyester and vinylester resin products, especially in summer. Recommended dosage: 0.1 - 0.6% (by weight).

Kč857.60

HAVELPOL - 2 - bílý 2%

eshop_111195

HAVELpol 2 is a pre-accelerated polyester resin for hand lamination or spraying, ideal for colored products like bathtubs. Curing requires peroxide K1 or Butanox M50. Pot Life is 26 min at 20°C. Cures in 24 hours at 20°C; can be post-cured at higher temperatures.

Kč360.17

HAVELPOL - 4

eshop_000040/5

HAVELpol 4 is a clear yellowish polyester resin suitable for hand laminating transparent parts and casting orgonites. Requires mixing with Accelerator-cobalt and Catalyst-peroxide for curing. Recommended workshop temperature is 18-22°C. Can be modified for slower reactions.

Kč354.31

HAVELPOL - 5 CLEAR neurychlená!

eshop_000040/6

HAVELpol 5 polyester resin is ideal for producing strong parts that endure high loads. Requires catalyst and accelerator for curing. Mix Peroxide K1 or Butanox M50 (1-2% by weight) and Cobalt accelerator (1-2% by weight) separately. Curing time varies with temperature and additives.

Kč316.25

HAVELPOL -1

eshop_000040/2

Pre-accelerated, thixotropic, low-emission orthophthalic resin suitable for low-strength products. Recommended mixing ratio is 100:1-2. Order peroxides separately for lamination.

Kč209.37

HAVELPOL -2 - nová receptura

eshop_000040/3

HAVELpol 2 is a pre-accelerated orthophthalic polyester resin for hand lamination or spraying. Curing requires peroxide K1 or Butanox M50 (100:1-3 ratio). Pot Life is 26 min at 20°C. Cures in 24 hours at 20°C; post-cure options available.

Kč346.99

LH 260 s odpěnovačem

eshop_112218/1

Epoxy resin LH 260 with silicone-free defoamer, low viscosity, high mechanical properties, good chemical resistance, and excellent thermal properties. Suitable for laminating with glass, carbon, and Kevlar fibers. Can be pigmented. Key properties: liquid state, weight equivalent 176-184 g/mol, max Gardner color 3, epoxy index 0.53-0.58, flash point...

Kč531.47

Peroxid K1 pro vytvrzování polyesterových pryskyřic

eshop_000021

High-quality resins with a recommended mixing ratio of 0.8-3%, depending on temperature and thickness. Avoid untested mixtures to prevent risks and costs.

Kč398.60

Peroxid SF 10 - MGS

eshop_000012

Peroxide for curing MGS gelcoats SF 30, T 30, T 35, T 3 PU, applied by spraying.

Kč2,150.47

Polyester Gelcoat/Vorgelat/ T 35 SH - MGS

eshop_000010/2

Equivalent to polyester gelcoat T 35 - SH variant, suitable for spray application due to its thinner consistency.

Kč1,295.73

Polyester Vorgelat PC - clear, sprayable - pre-gel

900496

Vorgelat PC clear is a pre-accelerated ISO-NPG polyester gelcoat designed for use with epoxy laminates in marine, construction, and transportation industries. It offers excellent resistance to water, weather, and UV radiation, ensuring it does not yellow. Ideal for visible carbon parts, cars, and surfboards, with a minimum order quantity of 20kg.

Kč476.69

Polyesterová pryskyřice Havelpol H 834 - REA 30W

eshop_000040/32

Polyester resin H 834 is a medium-reactive, thixotropic, pre-accelerated resin with controlled exotherm and low shrinkage, suitable for boat production and composite parts. It offers excellent mechanical properties, high HDT of 95°C, and good hydrolytic stability. Contains 66% non-volatile substances, reducing styrene emissions without losing adhesion....

Kč316.25