Gelcoat, paint thinners and hardener into gelcoats

Showing 1-15 of 15 item(s)

Clear Epoxy Gelcoat EG 100-T - for thin layers

eshop_001045

Epoxy gelcoat for spraying or brushing, creates smooth surfaces directly in the mold. Suitable for epoxy, polyester, and vinylester resins. Use hardener H 100 in a 100:40 ratio. Max thickness: 0.05-0.2 mm. Can be used as a topcoat for laminates and water-resistant wood coatings.

Kč1,142.00

Epoxidová pryskyřice povrchová Araldite SW 419-1

eshop_001074

Tools for sheet metal forming and general mold manufacturing. Well spreadable, does not run, minimal sedimentation. Mix with Hardener HV 2419 (100:13) for curing. Temperature resistance 60-70°C, color black. Cannot be polished.

Kč951.67

Epoxidová pryskyřice vysokoteplotní Araldit SW 18

eshop_001052/2

Green polishable epoxy gelcoat for mold making, suitable for hand lamination, vacuum infusion, and RTM. Resistant to styrene, with a curing ratio of 100:16 using Araldit HY 5159. Offers temperature resistance of 85/100°C and is favored for its easy application and high gloss finish.

Kč1,603.19

Epoxidový gelcoat 7060 čirý

eshop_900882

UV stabilized transparent epoxy gelcoat for the visible layer of carbon parts.

Kč1,541.70

Epoxidový gelcoat P na výrobu forem, černý

eshop_001061

Solid black gelcoat for molds, polishable, with a coverage of 0.5-1 kg/m2. Mixing ratio 100:17 (gelcoat:hardeners). Temperature resistance 130-140°C with EPH 161 (VE 3261), workability approx. 90 min.

Kč1,256.20

Epoxy Gelcoat for Mold Production Araldit SW 404

eshop_001052

High-quality blue gelcoat for mold production, known for its exceptional durability and chemical resistance. Cannot be polished. Use hardener Araldit HY 2404 in a 100:10 ratio, with a working time of 25-30 minutes.

Kč1,188.85

-Kč59.23

Epoxy gelcoat for mold production F 200 /MGS/

001054

Sanding and polishing possible. Easy repairs. Recommended hardener F 250, mixing ratio 100:25. Suitable for epoxy laminated molds. Light sanding required before further laminating. Yield 1-1.3 kg/m2. Can be used as a basecoat for carbon.

Kč631.80 Kč691.03

Time left

Epoxy gelcoat white spray EG 100-W - for thin layers

eshop_001044

Medium molecular weight epoxy resin solution in organic solvents, RAL 9003 white. Suitable for spraying and brushing, creates smooth surfaces directly in the mold. Compatible with epoxy, polyester, and vinylester resins. Excellent chemical and mechanical resistance, easy application.

Kč1,054.15

-Kč127.47

Hardener F 250 /MGS/

001057

Hardener F 200 for molding resin with a mixing ratio of 100:25. Processing time is 15-20 min at 25°C, with a gel time of 1-2 h and curing time of 24 h. Suitable for molds without heat resistance.

Kč764.84 Kč892.31

Time left

Hardener H 100 for epoxy spray gelcoat EG 100-W and EG 100-T

eshop_001046

Hardener for epoxy gelcoats, mixed in specific ratios for EG 100 T and EG 100 W. Ensure thorough mixing and avoid exposure to weather or chemicals until fully cured.

Kč1,200.56

Ředidlo pro epoxidový stříkací gelcoat EG 100-W a EG 100-T

eshop_001047

Thinner for epoxy solvent-based coatings, altering gelcoat viscosity for spray application. Use 5-20% for optimal results.

Kč500.72

Tužidlo 7067 do gelcoatu

eshop_900883

Hardener for transparent gelcoat 7060.

Kč1,434.82

Tužidlo HV 2419

eshop_001075

Hardener for epoxy gelcoat Araldite SW 419-1 with a mixing ratio of 100:13 by weight.

Kč1,839.79

Tužidlo HY 2404

eshop_001053

Hardener for epoxy gelcoat Araldit SW 404 with a mixing ratio of 100:10 (by weight) and a working time of 25-30 minutes.

Kč1,672.59

Tužidlo REN HY 5159 pro RENGEL SW 56

eshop_001123/2

Hardener for molding gelcoat SW 56 with recommended dosage of hardener HY 5159 in a 100:10 ratio (by weight). Temperature resistant up to 120°C, with a processing time of 25-30 min at 25°C for 250ml.

Kč2,459.69