Epoxy foams

Showing 1-8 of 8 item(s)

-Kč9.49

Epoxy foam 100 (Havel)

111012

Extremely viscous foaming epoxy resin for tough foams. Cures at room temperature, temperature resistance up to 50°C. Mix ratio 100:15-20 with hardener 128 or H 30.

Kč379.46 Kč388.94

Time left

Foam 29 x 20 mm core for hockey stick repairs SRS

eshop_900135/2

Foam for hockey stick repairs, supplied in a length of 2 m.

Kč122.40

-Kč293.84

Foaming agent EE 2 /HAVEL/ for epoxy foaming resins LH 100 and LH 128

111014

Foaming agent for LH 100 and LH 128 resin with a mixing ratio of 1-5% by weight. Achieve a bulk density of approximately 400 kg/m3 by adding 3%. Best mechanical properties are obtained by heating during or after curing at 50°C for 10 hours.

Kč3,134.31 Kč3,428.15

Time left

Foaming SYSTEM 5 for hockey stick repair, component A

111247

Component A is a high-viscosity epoxy resin for foaming, while Component B is a hardener based on polyamines. The mixture creates a hard foam with excellent mechanical and chemical properties, stable at 50°C. Recommended mixing ratio is 100:3:6 (A:C:B). Curing time is 1-2 hours with a pot life of 15-30 minutes. Ideal for creating hard foam in amounts up...

Kč355.74

Foaming SYSTEM 5 for hockey stick repair, component B

111248

Component B is a hardener (diethylenetriamine) for a foaming system. Component A is an epoxy resin with black fillers, suitable for foaming. Mix components A and C (100 g : 3 g), then add component B (6 g).

Kč383.91

Foaming SYSTEM 5 for hockey stick repair, component C

111249

Component C is a foaming agent for an epoxy resin system. Mix components A (100 g) and C (3 g) before adding hardener B (6 g). Achieves a density of 200 kg/m3 and excellent mechanical and thermal properties. Cures in 1-2 hours with a pot life of 15-30 minutes. Recommended for creating hard foam in amounts up to 200 grams.

Kč2,934.86

HAVELcell E1 component A

eshop_111101

HAVELcell E1 is a lightweight epoxy foam (550 kg/m3) ideal for sandwich constructions and boat manufacturing. Coated with fiberglass, it is lighter than water. Use with HAVELcell E1 hardener (100:35 ratio) and has a processing time of 30 minutes.

Kč860.16

HAVELcell E1 component B

eshop_111102

HAVELcell E1 component B is a hardener for curing epoxy foam HAVELcell E1 component A at a 100:35 weight ratio.

Kč1,169.82