Home

Frekote NC 770 - separátor

Frekote NC 770 - separátor

eshop_002055/2
Frekote separator 770-NC is a high-slip release agent for mold geometry issues, curing quickly at room temperature to create a glossy surface. Apply up to 4 layers, drying each for 5-10 minutes. Temperature resistance up to 400°C.
Kč1,740.81
Havel Adhesive G 40 sl. B 30

Havel Adhesive G 40 sl. B 30

eshop_111121
Havel Adhesive G 40 (A5 + B30) is an epoxy adhesive system suitable for bonding laminate parts at 10 - 30°C. For optimal curing, temper for 4.5 hours at 45 - 60°C. Recommended hardener B 30 in a 100:17 weight ratio. Working time: 30-40 minutes.
Kč1,019.89
Havel Adhesive G 40 sl.A 5

Havel Adhesive G 40 sl.A 5

eshop_111120
Structural adhesive for bonding laminate and wooden parts, suitable for polyester resin. Ideal for imprecise parts needing gap filling. High viscosity, processing time 20-40 minutes. Mix ratios: B 20 (100:13 +/- 2g), B 30 (100:17 +/- 2g). Curing can be accelerated at 40-60°C.
Kč1,182.26
Havel Wax 60-x3, 450g

Havel Wax 60-x3, 450g

eshop_900137
Universal release wax paste for polyester and epoxy resins, suitable for models, new tools, and continuous production. Enables multiple releases from established tools at temperatures up to 140°C.
Kč821.36
HAVELcell E1 složka A

HAVELcell E1 složka A

eshop_111101
HAVELcell E1 is a lightweight epoxy foam (550 kg/m3) ideal for sandwich constructions and boat manufacturing. Coated with fiberglass, it is lighter than water. Use with HAVELcell E1 hardener (100:35 ratio) and has a processing time of 30 minutes.
Kč860.16
HAVELcell E1 složka B

HAVELcell E1 složka B

eshop_111102
HAVELcell E1 component B is a hardener for curing epoxy foam HAVELcell E1 component A at a 100:35 weight ratio.
Kč1,169.82
HAVELcell P1 - Polyesterová pěna pro výrobu sendviče

HAVELcell P1 - Polyesterová pěna pro výrobu sendviče

eshop_111100
Reinforced white foam based on orthophthalic polyester resin, thixotropic and non-running, suitable for sandwich structures. Reduces product costs and speeds up production by up to 40%. Lower peroxide consumption and styrene evaporation. Ideal for boat manufacturing, floats even when submerged. Apply with brush or special equipment for best results. Bulk...
Kč349.19
HAVELex 1

HAVELex 1

eshop_002042/2
Special filler that increases viscosity and reduces resin bulk density. Made from special plastic for greater strength and toughness compared to microballoons or Aerosil. Sold by kg, approx. 25g = 1l. White color. Mechanical mixing available upon request.
Kč3,733.46
Havelgelcoat 65 - polyesterový bílý - natírací

Havelgelcoat 65 - polyesterový bílý - natírací

eshop_000040/26
Havelgelcoat 65 is a pre-accelerated isophthalic gelcoat for mold application, suitable for marine, construction, and transportation industries. It offers excellent water and weather resistance. Activate with Butanox M50 (1-3%).
Kč511.85
Havelgelcoat 65 - polyesterový čirý - natírací

Havelgelcoat 65 - polyesterový čirý - natírací

eshop_000040/55
Havelgelcoat 65 is a pre-accelerated isophthalic gelcoat for mold application, suitable for marine, construction, and transportation industries. It offers excellent resistance to water and weathering. Activate with Butanox M50 (1-3%).
Kč541.72
Havelgelcoat 97 - polyesterový čirý - natírací

Havelgelcoat 97 - polyesterový čirý - natírací

eshop_000040/28
Havelgelcoat 97 is a pre-accelerated isophthalic gelcoat for mold application, offering excellent adhesion to epoxy resins and pre-pregs. Suitable for brush application and available in various colors, it is designed for both wet layup and vacuum infusion systems.
Kč497.79
HAVELinhibit 1

HAVELinhibit 1

eshop_100022
Material for extending gel-time, ideal for large or complex polyester and vinylester resin products, especially in summer. Recommended dosage: 0.1 - 0.6% (by weight).
Kč857.60
HAVELPOL - 2 - bílý 2%

HAVELPOL - 2 - bílý 2%

eshop_111195
HAVELpol 2 is a pre-accelerated polyester resin for hand lamination or spraying, ideal for colored products like bathtubs. Curing requires peroxide K1 or Butanox M50. Pot Life is 26 min at 20°C. Cures in 24 hours at 20°C; can be post-cured at higher temperatures.
Kč360.17
HAVELPOL - 4

HAVELPOL - 4

eshop_000040/5
HAVELpol 4 is a clear yellowish polyester resin suitable for hand laminating transparent parts and casting orgonites. Requires mixing with Accelerator-cobalt and Catalyst-peroxide for curing. Recommended workshop temperature is 18-22°C. Can be modified for slower reactions.
Kč354.31
HAVELPOL - 5 CLEAR neurychlená!

HAVELPOL - 5 CLEAR neurychlená!

eshop_000040/6
HAVELpol 5 polyester resin is ideal for producing strong parts that endure high loads. Requires catalyst and accelerator for curing. Mix Peroxide K1 or Butanox M50 (1-2% by weight) and Cobalt accelerator (1-2% by weight) separately. Curing time varies with temperature and additives.
Kč316.25
HAVELPOL -1

HAVELPOL -1

eshop_000040/2
Pre-accelerated, thixotropic, low-emission orthophthalic resin suitable for low-strength products. Recommended mixing ratio is 100:1-2. Order peroxides separately for lamination.
Kč209.37
HAVELPOL -2 - nová receptura

HAVELPOL -2 - nová receptura

eshop_000040/3
HAVELpol 2 is a pre-accelerated orthophthalic polyester resin for hand lamination or spraying. Curing requires peroxide K1 or Butanox M50 (100:1-3 ratio). Pot Life is 26 min at 20°C. Cures in 24 hours at 20°C; post-cure options available.
Kč346.99
Katalyzátor k HT 33

Katalyzátor k HT 33

eshop_710125/c
Catalyst for liquid silicone resin suitable for casting molds and products. Achieves Shore hardness 33 after curing. Mixing ratio 1:1, workability 20 minutes, curing time 3 hours. Requires silicone HT 33.
Kč1,827.20
Katalyzátor k HT 45

Katalyzátor k HT 45

eshop_710146/a
Liquid catalyst for casting molds and products with a processing time of 10 minutes and a demolding time of 1:20 hours. Viscosity: 8,000 cPs, Shore hardness 45 after curing. Mixing ratio 1:1 (by weight). Order with Liquid Silicone HT 45 transparent. Thixotropic agent available for thin coatings.
Kč1,581.23
Katalyzátor k ZA 13

Katalyzátor k ZA 13

eshop_710123/a
Catalyst for liquid silicone resin, ideal for small and complex molds. Soft yet flexible, achieving Shore hardness 13 after curing. Mixing ratio 1:1, with 45 minutes workability and 4 hours curing time. Requires silicone ZA 13.
Kč1,803.77
Katalyzátor k ZA 22

Katalyzátor k ZA 22

eshop_710124/b
Catalyst for blue silicone resin with a processing time of 15 minutes and a demolding time of 1 hour. Achieves Shore hardness 22 after curing. Mixing ratio 1:1 (by weight). Silicone ZA 22 sold separately. Can use retarder to extend processing time and thixotropic agent for thickening.
Kč1,751.43
LH 260 s odpěnovačem

LH 260 s odpěnovačem

eshop_112218/1
Epoxy resin LH 260 with silicone-free defoamer, low viscosity, high mechanical properties, good chemical resistance, and excellent thermal properties. Suitable for laminating with glass, carbon, and Kevlar fibers. Can be pigmented. Key properties: liquid state, weight equivalent 176-184 g/mol, max Gardner color 3, epoxy index 0.53-0.58, flash point...
Kč531.47
Home
Product added to wishlist
Product added to compare.

iqitcookielaw - module, put here your own cookie law text