Home

Showing 49-72 of 154 item(s)

Frekote NC 770 - separátor

eshop_002055/2

Frekote separator 770-NC is a high-slip release agent for mold geometry issues, curing quickly at room temperature to create a glossy surface. Apply up to 4 layers, drying each for 5-10 minutes. Temperature resistance up to 400°C.

Kč1,740.81

Havel Adhesive G 40 sl. B 30

eshop_111121

Havel Adhesive G 40 (A5 + B30) is an epoxy adhesive system suitable for bonding laminate parts at 10 - 30°C. For optimal curing, temper for 4.5 hours at 45 - 60°C. Recommended hardener B 30 in a 100:17 weight ratio. Working time: 30-40 minutes.

Kč1,019.89

Havel Adhesive G 40 sl.A 5

eshop_111120

Structural adhesive for bonding laminate and wooden parts, suitable for polyester resin. Ideal for imprecise parts needing gap filling. High viscosity, processing time 20-40 minutes. Mix ratios: B 20 (100:13 +/- 2g), B 30 (100:17 +/- 2g). Curing can be accelerated at 40-60°C.

Kč1,182.26

Havel Wax 60-x3, 450g

eshop_900137

Universal release wax paste for polyester and epoxy resins, suitable for models, new tools, and continuous production. Enables multiple releases from established tools at temperatures up to 140°C.

Kč821.36

HAVELcell E1 složka A

eshop_111101

HAVELcell E1 is a lightweight epoxy foam (550 kg/m3) ideal for sandwich constructions and boat manufacturing. Coated with fiberglass, it is lighter than water. Use with HAVELcell E1 hardener (100:35 ratio) and has a processing time of 30 minutes.

Kč860.16

HAVELcell E1 složka B

eshop_111102

HAVELcell E1 component B is a hardener for curing epoxy foam HAVELcell E1 component A at a 100:35 weight ratio.

Kč1,169.82

HAVELcell P1 - Polyesterová pěna pro výrobu sendviče

eshop_111100

Reinforced white foam based on orthophthalic polyester resin, thixotropic and non-running, suitable for sandwich structures. Reduces product costs and speeds up production by up to 40%. Lower peroxide consumption and styrene evaporation. Ideal for boat manufacturing, floats even when submerged. Apply with brush or special equipment for best results. Bulk...

Kč349.19

HAVELex 1

eshop_002042/2

Special filler that increases viscosity and reduces resin bulk density. Made from special plastic for greater strength and toughness compared to microballoons or Aerosil. Sold by kg, approx. 25g = 1l. White color. Mechanical mixing available upon request.

Kč3,733.46

Havelgelcoat 65 - polyesterový bílý - natírací

eshop_000040/26

Havelgelcoat 65 is a pre-accelerated isophthalic gelcoat for mold application, suitable for marine, construction, and transportation industries. It offers excellent water and weather resistance. Activate with Butanox M50 (1-3%).

Kč511.85

Havelgelcoat 65 - polyesterový čirý - natírací

eshop_000040/55

Havelgelcoat 65 is a pre-accelerated isophthalic gelcoat for mold application, suitable for marine, construction, and transportation industries. It offers excellent resistance to water and weathering. Activate with Butanox M50 (1-3%).

Kč541.72

Havelgelcoat 97 - polyesterový čirý - natírací

eshop_000040/28

Havelgelcoat 97 is a pre-accelerated isophthalic gelcoat for mold application, offering excellent adhesion to epoxy resins and pre-pregs. Suitable for brush application and available in various colors, it is designed for both wet layup and vacuum infusion systems.

Kč497.79

HAVELinhibit 1

eshop_100022

Material for extending gel-time, ideal for large or complex polyester and vinylester resin products, especially in summer. Recommended dosage: 0.1 - 0.6% (by weight).

Kč857.60

HAVELPOL - 2 - bílý 2%

eshop_111195

HAVELpol 2 is a pre-accelerated polyester resin for hand lamination or spraying, ideal for colored products like bathtubs. Curing requires peroxide K1 or Butanox M50. Pot Life is 26 min at 20°C. Cures in 24 hours at 20°C; can be post-cured at higher temperatures.

Kč360.17

HAVELPOL - 4

eshop_000040/5

HAVELpol 4 is a clear yellowish polyester resin suitable for hand laminating transparent parts and casting orgonites. Requires mixing with Accelerator-cobalt and Catalyst-peroxide for curing. Recommended workshop temperature is 18-22°C. Can be modified for slower reactions.

Kč354.31

HAVELPOL - 5 CLEAR neurychlená!

eshop_000040/6

HAVELpol 5 polyester resin is ideal for producing strong parts that endure high loads. Requires catalyst and accelerator for curing. Mix Peroxide K1 or Butanox M50 (1-2% by weight) and Cobalt accelerator (1-2% by weight) separately. Curing time varies with temperature and additives.

Kč316.25

HAVELPOL -1

eshop_000040/2

Pre-accelerated, thixotropic, low-emission orthophthalic resin suitable for low-strength products. Recommended mixing ratio is 100:1-2. Order peroxides separately for lamination.

Kč209.37

HAVELPOL -2 - nová receptura

eshop_000040/3

HAVELpol 2 is a pre-accelerated orthophthalic polyester resin for hand lamination or spraying. Curing requires peroxide K1 or Butanox M50 (100:1-3 ratio). Pot Life is 26 min at 20°C. Cures in 24 hours at 20°C; post-cure options available.

Kč346.99

Leštič forem - pasta Oskar´s M-100

eshop_002039

Polishing paste, packaging 1kg.

Kč696.91

Leštící pasta Oskar´s M-50 (1kg)

eshop_002039/4

Coarser polishing paste for molds and products, 1L per package.

Kč672.02

LH 260 s odpěnovačem

eshop_112218/1

Epoxy resin LH 260 with silicone-free defoamer, low viscosity, high mechanical properties, good chemical resistance, and excellent thermal properties. Suitable for laminating with glass, carbon, and Kevlar fibers. Can be pigmented. Key properties: liquid state, weight equivalent 176-184 g/mol, max Gardner color 3, epoxy index 0.53-0.58, flash point...

Kč531.47

Mikrobalony odlehčené

eshop_002044

Microballoons are miniature hollow glass spheres used for thickening resins, allowing for larger applications without running. They increase resin volume without significantly affecting weight and help reduce reaction temperature during curing, preventing defects. Bulk density: 0.08 g/cm3, Density: 0.13 g/cm3.

Kč541.72

Mikrobalony standardní

eshop_002043

Microballoons are miniature hollow glass spheres used to thicken resins, allowing for application in larger quantities without running. They increase resin volume without significantly affecting weight and help reduce reaction temperature during curing, preventing defects.

Kč541.72

Mikroceluloza-prach - bílá

eshop_002041

A cost-effective filler for thickening all resins, ideal for applications requiring larger quantities without running. Mixes well with chopped glass fibers, aerosil, or microballoons. Fiber length: +/- 0.1 mm; Diameter: +/- 0.02 mm.

Kč218.88