Shopping Cart
There are no more items in your cart
*Epoxy HAVEL*
Polyester resins and gelcoats
Glass fabrics
Yarn
Aeroglass
TAPES AND BRAIDS
Pigments
Home
Kč173.03
FMS - plnič pórů
eshop_002029/1
FMS is a mold pore filler suitable for polyester, epoxy, and other resins. It effectively fills pores in new and older molds, enhancing release properties when used with Frekote products. Applied at room temperature with a lint-free cloth, it requires 1-3 layers, each drying for 15-20 minutes.
Kč2,642.64
Foam 29 x 20 mm core for hockey stick repairs SRS
eshop_900135/2
Foam for hockey stick repairs, supplied in a length of 2 m.
Kč122.40
- -Kč293.84
Foaming agent EE 2 /HAVEL/ for epoxy foaming resins LH 100 and LH 128
111014
Foaming agent for LH 100 and LH 128 resin with a mixing ratio of 1-5% by weight. Achieve a bulk density of approximately 400 kg/m3 by adding 3%. Best mechanical properties are obtained by heating during or after curing at 50°C for 10 hours.
Kč3,134.31
Kč3,428.15
Time left
- -Kč1,067.22
Foaming Agent EP 50 /MGS/
001034
Mix foaming resins L 35, L 36, and L 40 in a ratio of 100:1 to 100:3 (max 100:5). Ensure thorough mixing, preferably mechanically.
Kč3,913.14
Kč4,980.36
Time left
Foaming SYSTEM 5 for hockey stick repair, component A
111247
Component A is a high-viscosity epoxy resin for foaming, while Component B is a hardener based on polyamines. The mixture creates a hard foam with excellent mechanical and chemical properties, stable at 50°C. Recommended mixing ratio is 100:3:6 (A:C:B). Curing time is 1-2 hours with a pot life of 15-30 minutes. Ideal for creating hard foam in amounts up...
Kč355.74
Foaming SYSTEM 5 for hockey stick repair, component B
111248
Component B is a hardener (diethylenetriamine) for a foaming system. Component A is an epoxy resin with black fillers, suitable for foaming. Mix components A and C (100 g : 3 g), then add component B (6 g).
Kč383.91
Foaming SYSTEM 5 for hockey stick repair, component C
111249
Component C is a foaming agent for an epoxy resin system. Mix components A (100 g) and C (3 g) before adding hardener B (6 g). Achieves a density of 200 kg/m3 and excellent mechanical and thermal properties. Cures in 1-2 hours with a pot life of 15-30 minutes. Recommended for creating hard foam in amounts up to 200 grams.
Kč2,934.86
Formula Five - separační vosk-1ks -340g
eshop_002046
FORMULA FIVE is a versatile release wax combining carnauba wax with modern polymers and silicone for easy application. Ideal for use with FORMULA FIVE Clean ‘N Glaze, it ensures smooth release from molds. Suitable for porous molds after sealing, it requires a clean, dry surface. Apply in thin layers, polish to a high gloss, and wait an hour before...
Kč499.13
Frekote 700 NC - separátor
eshop_002030
Semipermanent polymer separator for multiple uses, suitable for all thermosets and most moldable polymers. Cures at room temperature, providing a high gloss finish. Application temperature range: up to 130°C.
Kč1,386.06
Frekote B 15 - základový separátor
eshop_002029
B-15 pore filler effectively fills micropores and scratches on mold surfaces, enhancing release properties when used with Frekote products. Apply in thin layers, allowing 30 minutes of drying time between layers, with final curing taking at least 24 hours.
Kč4,235.00
Frekote NC 770 - separátor
eshop_002055/2
Frekote separator 770-NC is a high-slip release agent for mold geometry issues, curing quickly at room temperature to create a glossy surface. Apply up to 4 layers, drying each for 5-10 minutes. Temperature resistance up to 400°C.
Kč1,438.69
Fuzzy rollers for applying resin-small
010048
Holds a large amount of resin, increases work productivity, solvent resistant, roller length 5 cm.
Kč11.86
Fuzzy Rollers for Resin Application - Large
010053
Holds a large amount of resin, increases work productivity, resistant to solvents, roller length 10 cm.
Kč11.86
Glass fabric 220 g/m2 - canvas
eshop_004023
Fibers per cm2: warp x weft 12 x 9.6 (4.8 x 2). Warp fiber: EC11 105, Weft fiber: EC11 102. Lubrication: silane.
Kč101.74
Glass fabric 25 g/m2 r. 106, w. 110 cm
004002/1a
Foreign production fabric suitable for model making with a thread count of 22.2x22.2 threads per cm2 (warp x weft). Uses EC5 5.5 fiber in both warp and weft, with a 50/50 warp/weft ratio.
Kč116.27
Glass fabric 290g/m2 with aluminum surface - twill 2/2, width 100cm
004080/1
High-quality glass fabric with a silver effect, ideal for visible layers. Twill 2/2.
Kč832.43
Glass fabric 390g/m2 -cs-interglas 92140 twill 2/2
004075
Discounts available for regular or larger orders.
Kč373.53
Glass fabric 80g/m2 - plain, width 100 cm
004011
Fibers per cm2: warp x weft 12 x 11.4. Warp and weft fiber: EC6 34. Lubrication: silane. See technical data sheet for more details.
Kč61.66
Glass Fiber Mat - Wood Pattern - WG 003 BL Width 100cm
540023/1
Glass mat base (30g/m2) with an additional weight increase of 5-10g/m2 after printing. Custom design options available upon request.
Kč114.08
Glass mat emulsion 150g/m2, width 125 cm
500002
32kg Emulsion Mats - PVA-based emulsion binder that dissolves quickly in styrene, suitable for complex-shaped products and laminates with unsaturated polyester resins.
Kč192.98
- -Kč26.09
GREEN PEARL 235 - pearlescent powder pigment for producing metallics
002072/12
Fine pearl for paints and cosmetics. Mix with clear gelcoat for a metallic design. Requires a second color for optimal effect. Other shades available; contact moravecr@havel-composites.com for details.
Kč469.58
Kč495.66
Time left
- -Kč97.83
Hardener 500 MGS
001024
Hardener for epoxy resin 285 with a mixing ratio of 100:40 by weight and 100:50 by volume. Processing time is 10-15 min at 20°C. Suitable for fast curing at low temperatures from +10°C.
Kč1,043.50
Kč1,141.33
Time left
- -Kč127.47
Hardener F 250 /MGS/
001057
Hardener F 200 for molding resin with a mixing ratio of 100:25. Processing time is 15-20 min at 25°C, with a gel time of 1-2 h and curing time of 24 h. Suitable for molds without heat resistance.
Kč764.84
Kč892.31
Time left
Havel Adhesive G 40 sl. B 30
eshop_111121
Havel Adhesive G 40 (A5 + B30) is an epoxy adhesive system suitable for bonding laminate parts at 10 - 30°C. For optimal curing, temper for 4.5 hours at 45 - 60°C. Recommended hardener B 30 in a 100:17 weight ratio. Working time: 30-40 minutes.
Kč842.89
Havel Adhesive G 40 sl.A 5
eshop_111120
Structural adhesive for bonding laminate and wooden parts, suitable for polyester resin. Ideal for imprecise parts needing gap filling. High viscosity, processing time 20-40 minutes. Mix ratios: B 20 (100:13 +/- 2g), B 30 (100:17 +/- 2g). Curing can be accelerated at 40-60°C.
Kč977.08
HAVEL filler E1,složka A
eshop_111107/1
Two-component filler for epoxy laminates, wood, and metals. Features auto-penetration for better adhesion, low shrinkage, and easy sanding. Curing requires hardener HAVELfiller E1/B (100:35 ratio). Working time is 20-30 minutes (1-2 hours with B1). May crystallize; heat to 50-60°C to restore.
Kč426.53