Home

HAVELinhibit 1

HAVELinhibit 1

eshop_100022
Material for extending gel-time, ideal for large or complex polyester and vinylester resin products, especially in summer. Recommended dosage: 0.1 - 0.6% (by weight).
Kč857.60
HAVELPOL - 2 - bílý 2%

HAVELPOL - 2 - bílý 2%

eshop_111195
HAVELpol 2 is a pre-accelerated polyester resin for hand lamination or spraying, ideal for colored products like bathtubs. Curing requires peroxide K1 or Butanox M50. Pot Life is 26 min at 20°C. Cures in 24 hours at 20°C; can be post-cured at higher temperatures.
Kč360.17
HAVELPOL - 4

HAVELPOL - 4

eshop_000040/5
HAVELpol 4 is a clear yellowish polyester resin suitable for hand laminating transparent parts and casting orgonites. Requires mixing with Accelerator-cobalt and Catalyst-peroxide for curing. Recommended workshop temperature is 18-22°C. Can be modified for slower reactions.
Kč354.31
HAVELPOL - 5 CLEAR neurychlená!

HAVELPOL - 5 CLEAR neurychlená!

eshop_000040/6
HAVELpol 5 polyester resin is ideal for producing strong parts that endure high loads. Requires catalyst and accelerator for curing. Mix Peroxide K1 or Butanox M50 (1-2% by weight) and Cobalt accelerator (1-2% by weight) separately. Curing time varies with temperature and additives.
Kč316.25
HAVELPOL -1

HAVELPOL -1

eshop_000040/2
Pre-accelerated, thixotropic, low-emission orthophthalic resin suitable for low-strength products. Recommended mixing ratio is 100:1-2. Order peroxides separately for lamination.
Kč209.37
HAVELPOL -2 - nová receptura

HAVELPOL -2 - nová receptura

eshop_000040/3
HAVELpol 2 is a pre-accelerated orthophthalic polyester resin for hand lamination or spraying. Curing requires peroxide K1 or Butanox M50 (100:1-3 ratio). Pot Life is 26 min at 20°C. Cures in 24 hours at 20°C; post-cure options available.
Kč346.99
Katalyzátor k HT 33

Katalyzátor k HT 33

eshop_710125/c
Catalyst for liquid silicone resin suitable for casting molds and products. Achieves Shore hardness 33 after curing. Mixing ratio 1:1, workability 20 minutes, curing time 3 hours. Requires silicone HT 33.
Kč1,827.20
Katalyzátor k HT 45

Katalyzátor k HT 45

eshop_710146/a
Liquid catalyst for casting molds and products with a processing time of 10 minutes and a demolding time of 1:20 hours. Viscosity: 8,000 cPs, Shore hardness 45 after curing. Mixing ratio 1:1 (by weight). Order with Liquid Silicone HT 45 transparent. Thixotropic agent available for thin coatings.
Kč1,581.23
Katalyzátor k ZA 13

Katalyzátor k ZA 13

eshop_710123/a
Catalyst for liquid silicone resin, ideal for small and complex molds. Soft yet flexible, achieving Shore hardness 13 after curing. Mixing ratio 1:1, with 45 minutes workability and 4 hours curing time. Requires silicone ZA 13.
Kč1,803.77
Katalyzátor k ZA 22

Katalyzátor k ZA 22

eshop_710124/b
Catalyst for blue silicone resin with a processing time of 15 minutes and a demolding time of 1 hour. Achieves Shore hardness 22 after curing. Mixing ratio 1:1 (by weight). Silicone ZA 22 sold separately. Can use retarder to extend processing time and thixotropic agent for thickening.
Kč1,751.43
LH 260 s odpěnovačem

LH 260 s odpěnovačem

eshop_112218/1
Epoxy resin LH 260 with silicone-free defoamer, low viscosity, high mechanical properties, good chemical resistance, and excellent thermal properties. Suitable for laminating with glass, carbon, and Kevlar fibers. Can be pigmented. Key properties: liquid state, weight equivalent 176-184 g/mol, max Gardner color 3, epoxy index 0.53-0.58, flash point...
Kč531.47
Peroxid SF 10 - MGS

Peroxid SF 10 - MGS

eshop_000012
Peroxide for curing MGS gelcoats SF 30, T 30, T 35, T 3 PU, applied by spraying.
Kč2,150.47
Polyesterová pryskyřice Havelpol H 834 - REA 30W

Polyesterová pryskyřice Havelpol H 834 - REA 30W

eshop_000040/32
Polyester resin H 834 is a medium-reactive, thixotropic, pre-accelerated resin with controlled exotherm and low shrinkage, suitable for boat production and composite parts. It offers excellent mechanical properties, high HDT of 95°C, and good hydrolytic stability. Contains 66% non-volatile substances, reducing styrene emissions without losing adhesion....
Kč316.25
Polyesterová pryskyřice Polylite 32032-20

Polyesterová pryskyřice Polylite 32032-20

eshop_900493
Colorless, clear, accelerated, UV-stabilized orthophthalic resin (POLYLITE® 32032-20) with low viscosity. Ideal for applications requiring extreme purity and clarity, such as advertising items and encapsulating biological preparations. Same refractive index as glass. Recommended catalyst: Peroxide K1 (1-1.5%).
Kč499.62
Polyesterová pryskyřice průzračná licí

Polyesterová pryskyřice průzračná licí

eshop_010288/1
Colorless, clear, UV-stabilized orthophthalic resin with low viscosity. Ideal for applications requiring extreme purity and clarity. Same refractive index as glass. Recommended for advertising items, encapsulating biological preparations, and casting orgonites. Features include acrylic modification, easy air release, and stable quality.
Kč435.57
Polyesterový gelcoat bílý GS 2000 H - Norpol

Polyesterový gelcoat bílý GS 2000 H - Norpol

eshop_000016
Creates a smooth visible layer on the mold surface without further finishing. Two-component gelcoat system; mix in 1-3% Butanox M50 catalyst before use (sold separately).
Kč514.63
Polyesterový gelcoat čirý GS 100 S - Norpol GS Base - S

Polyesterový gelcoat čirý GS 100 S - Norpol GS Base - S

eshop_000015
Creates a smooth visual layer directly in the mold without further treatment. Use pigment pastes for coloring and Peroxide K1 for curing. Recommended layer thickness is 0.5 to 0.8 mm, applied by spraying or painting. Ensure proper thickness to avoid surface defects. Styrene removal is essential for effective curing.
Kč363.83
Polyesterový gelcoat/Vorgelat/ T 30 - MGS - čirý

Polyesterový gelcoat/Vorgelat/ T 30 - MGS - čirý

eshop_000008/a
High scratch-resistant gelcoat, mix with Peroxide SF 10 (100:10). Workability 25min, gel time 150min, full cure in 5-6 hours. Color with polyester pigment pastes. Dilute with SF thinner up to 10 parts.
Kč1,445.36
Polyesterový gelcoat/Vorgelat/ T 35 - MGS

Polyesterový gelcoat/Vorgelat/ T 35 - MGS

eshop_000010/1
Specially developed gelcoat for aircraft manufacturing, available only in white. Recommended to use original peroxides and thinners for best results. Can be diluted with thinner SF up to 10 weight parts. Suitable for coloring with pigment pastes for polyesters. Recommended peroxides for curing SF 10 available in the online store.
Kč1,288.41
Tekutý silikon HT 33 - transparent LT

Tekutý silikon HT 33 - transparent LT

eshop_710125
Liquid silicone resin for casting molds and products, offering flexibility and tear resistance. Suitable for larger or less complex molds, achieving Shore hardness 33 after curing. Mixing ratio 1:1, with a workability of 20 minutes and curing time of 3 hours. Requires a separate catalyst for HT 33.
Kč1,827.20
Home
Product added to wishlist
Product added to compare.

iqitcookielaw - module, put here your own cookie law text