Home

Aerosil 200- tixotropní plnivo pro zahuštění pryskyřic

eshop_002042

Suitable for thickening all resins, keeping them vertical to prevent dripping. Caution: larger volumes may overheat and cause defects. For improved mechanical properties, combine with ground cotton, microcellulose, microballoons, or chopped fibers. Available from our company. Equivalent to Aerosil, now offered as Cabosil M5 at a better price.

Kč499.26

Apyral - plnivo do polyesterových pryskyřic 2E

eshop_010379

Filler for polyester and epoxy resins that reduces shrinkage and flammability. Can be filled up to 100:200 (Apiral 2E) for self-extinguishing properties. Recommended ratio for molding mixtures is 1:1, maintaining processability. Available in medium (20 micrometers) and finer types (down to 1 micrometer).

Kč258.12

Aramid-uhlíková punčocha průměr 32 mm, 032.844026-ACT2 (2819)- 28,54 g/bm

eshop_008085

Diameter 32 mm, fiber orientation at 45°, weight 28.47 g/m, suitable for tubes with a diameter of 13-38 mm.

Kč300.14

Aramid-uhlíková punčocha průměr 45 mm, 045.1004022-ACT2 (3192)

eshop_008086

Diameter 45 mm, fiber orientation at 45°. Weight 33.52 g/m, suitable for tubes with a diameter of 16-53 mm.

Kč271.03

Aramid-uhlíková punčocha průměr 60 mm, 060.1006226-ACT2 (33,80 g/bm)/3703/

eshop_008087

Diameter 60 mm, fiber orientation at 45°, weight 33.84 g/lm (0.308 kg/m2, 3.380 kg/100m).

Kč303.14

Aramidová páska diagonální 030.265191610-TB (2728), 11,60 g/bm, š.30mm

eshop_400036

Weight 11.6 g/bm

Kč92.09

Aramidová páska diagonální š. 40 mm 040.465343220-TB(staré číslo 040.465343160-TB)(3155)

eshop_008100

Weight: 23.40 g/bm

Kč170.64

Aramidová páska diagonální šíře 10 mm, 010.3726840-TB (1625) - 3,36 g/bm

eshop_008103

Material designed for reinforcing bonded laminate parts, shapes well to contours, suitable for complex shapes, finished edges, weight 3.36 g/bm.

Kč33.60

Aramidová páska diagonální šíře 20 mm, 020.26534840 (8698)- 6,25 g/bm

eshop_008097

Aramid tape 20 mm wide, designed for reinforcing laminated parts. Shapes well to contours and suitable for complex shapes. Stitched edges, weight 6.25 g/m.

Kč65.23

Aramidová punčocha průměr 20 mm, 020.348201210-T /2268/- 6,50 g/bm

eshop_008092

Weight specifications: 0.148 kg/m2 and 0.650 kg per 100 meters.

Kč39.02

Aramidová punčocha průměr 20mm, 020.2722221210-T (2253)- 21,02 g/bm

eshop_008098/2

Weight: 0.424 kg/m2, 2.102 kg per 100m.

Kč138.06

Bavlněné vločky

eshop_002048

Lightweight, non-flowing adhesives and casting elements for molds using a 50% mixture of glass fiber shavings and cotton flakes. Volume data indicates the supplied quantity, which may compress during transport or storage.

Kč434.84

Cabosil M5 (bal.10kg)

eshop_002042/1

Silica-based thickening agent for resins and paints, suitable for thixotropic modifications. Available in 10kg paper bags, can be combined with fillers like microballoons and cotton fibers.

Kč567.34

Diolenová páska diagonálně tkaná š. 30 mm (030.265301100280 DB) (2731)- 10,00 g/bm

eshop_008042

Weight 10 g/bm

Kč44.66

Diolenová páska diagonálně tkaná šíře 20 mm, 020.26534550-DB (2238)- 3,9 g/bm

eshop_008105

Reinforcing material for glued laminate parts, adaptable to complex shapes with diagonal weaving. Weight 3.9 g/bm.

Kč40.19

Diolenová páska š. 50 mm diagonálně tkaná /3400/ - 19,70 g/bm

eshop_008055

Weight: 19.70 g/bm

Kč55.64

Diolenová punčocha - průměr 20 mm (2304), bílá - 11,00 g/bm

eshop_900427/1

Weight: 11.00 g/bm

Kč36.02

FMS - plnič pórů

eshop_002029/1

FMS is a mold pore filler suitable for polyester, epoxy, and other resins. It effectively fills pores in new and older molds, enhancing release properties when used with Frekote products. Applied at room temperature with a lint-free cloth, it requires 1-3 layers, each drying for 15-20 minutes.

Kč3,197.59

Formula Five - separační vosk-1ks -340g

eshop_002046

FORMULA FIVE is a versatile release wax combining carnauba wax with modern polymers and silicone for easy application. Ideal for use with FORMULA FIVE Clean ‘N Glaze, it ensures smooth release from molds. Suitable for porous molds after sealing, it requires a clean, dry surface. Apply in thin layers, polish to a high gloss, and wait an hour before...

Kč603.94

Frekote 700 NC - separátor

eshop_002030

Semipermanent polymer separator for multiple uses, suitable for all thermosets and most moldable polymers. Cures at room temperature, providing a high gloss finish. Application temperature range: up to 130°C.

Kč1,677.13

Frekote B 15 - základový separátor

eshop_002029

B-15 pore filler effectively fills micropores and scratches on mold surfaces, enhancing release properties when used with Frekote products. Apply in thin layers, allowing 30 minutes of drying time between layers, with final curing taking at least 24 hours.

Kč5,124.35

Frekote NC 770 - separátor

eshop_002055/2

Frekote separator 770-NC is a high-slip release agent for mold geometry issues, curing quickly at room temperature to create a glossy surface. Apply up to 4 layers, drying each for 5-10 minutes. Temperature resistance up to 400°C.

Kč1,740.81

Havel Wax 60-x3, 450g

eshop_900137

Universal release wax paste for polyester and epoxy resins, suitable for models, new tools, and continuous production. Enables multiple releases from established tools at temperatures up to 140°C.

Kč821.36

HAVELex 1

eshop_002042/2

Special filler that increases viscosity and reduces resin bulk density. Made from special plastic for greater strength and toughness compared to microballoons or Aerosil. Sold by kg, approx. 25g = 1l. White color. Mechanical mixing available upon request.

Kč3,733.46

Leštič forem - pasta Oskar´s M-100

eshop_002039

Polishing paste, packaging 1kg.

Kč696.91

Leštící pasta Oskar´s M-50 (1kg)

eshop_002039/4

Coarser polishing paste for molds and products, 1L per package.

Kč672.02

Mikrobalony odlehčené

eshop_002044

Microballoons are miniature hollow glass spheres used for thickening resins, allowing for larger applications without running. They increase resin volume without significantly affecting weight and help reduce reaction temperature during curing, preventing defects. Bulk density: 0.08 g/cm3, Density: 0.13 g/cm3.

Kč541.72

Mikrobalony standardní

eshop_002043

Microballoons are miniature hollow glass spheres used to thicken resins, allowing for application in larger quantities without running. They increase resin volume without significantly affecting weight and help reduce reaction temperature during curing, preventing defects.

Kč541.72

Mikroceluloza-prach - bílá

eshop_002041

A cost-effective filler for thickening all resins, ideal for applications requiring larger quantities without running. Mixes well with chopped glass fibers, aerosil, or microballoons. Fiber length: +/- 0.1 mm; Diameter: +/- 0.02 mm.

Kč218.88

Mleté skelné vlákno - moučka (bílá)

eshop_002069/4

Suitable as a filler for resins and for various applications.

Kč261.34

Náhradní pěnový moltopren pro PVA štětec

eshop_002026

Replacement foam for PVA brush.

Kč57.39

Sekaná skelná vlákna 0,2 mm

eshop_002050

Very fine filler for epoxy and polyester resins with a grain size of 0.2mm. Enhances mechanical properties while maintaining transparency.

Kč467.05

Sekaná skelná vlákna 6 mm

eshop_002053

Suitable as a filler for resins and for various applications.

Kč206.15

Separační vosk Oskar´s M-700/C

eshop_002038

Wax-based separator, 700g, suitable as a base layer for PVA separator.

Kč889.44

Separační vosk TR 104 397g

eshop_002034

Quality wax-based separator, 397g. Suitable for higher temperatures. TR 104 can be replaced by TR 216. Not suitable as a base layer under PVA due to blooming.

Kč809.28

Separační základový vosk

eshop_002028

Highly effective base wax for non-wettable surfaces like laminate molds and silicone. Improves wettability and creates a glossy release layer. Usable up to 100°C, suitable under PVA separator. Apply 3-6 layers on clean surfaces; renew after three releases for used molds. Available in 1 or 4 kg packaging.

Kč529.27