Home

Havelgelcoat 97 - polyesterový čirý - natírací

Havelgelcoat 97 - polyesterový čirý - natírací

eshop_000040/28
Havelgelcoat 97 is a pre-accelerated isophthalic gelcoat for mold application, offering excellent adhesion to epoxy resins and pre-pregs. Suitable for brush application and available in various colors, it is designed for both wet layup and vacuum infusion systems.
Kč497.79
HAVELinhibit 1

HAVELinhibit 1

eshop_100022
Material for extending gel-time, ideal for large or complex polyester and vinylester resin products, especially in summer. Recommended dosage: 0.1 - 0.6% (by weight).
Kč857.60
HAVELPOL - 2 - bílý 2%

HAVELPOL - 2 - bílý 2%

eshop_111195
HAVELpol 2 is a pre-accelerated polyester resin for hand lamination or spraying, ideal for colored products like bathtubs. Curing requires peroxide K1 or Butanox M50. Pot Life is 26 min at 20°C. Cures in 24 hours at 20°C; can be post-cured at higher temperatures.
Kč360.17
HAVELPOL - 4

HAVELPOL - 4

eshop_000040/5
HAVELpol 4 is a clear yellowish polyester resin suitable for hand laminating transparent parts and casting orgonites. Requires mixing with Accelerator-cobalt and Catalyst-peroxide for curing. Recommended workshop temperature is 18-22°C. Can be modified for slower reactions.
Kč354.31
HAVELPOL - 5 CLEAR neurychlená!

HAVELPOL - 5 CLEAR neurychlená!

eshop_000040/6
HAVELpol 5 polyester resin is ideal for producing strong parts that endure high loads. Requires catalyst and accelerator for curing. Mix Peroxide K1 or Butanox M50 (1-2% by weight) and Cobalt accelerator (1-2% by weight) separately. Curing time varies with temperature and additives.
Kč316.25
HAVELPOL -1

HAVELPOL -1

eshop_000040/2
Pre-accelerated, thixotropic, low-emission orthophthalic resin suitable for low-strength products. Recommended mixing ratio is 100:1-2. Order peroxides separately for lamination.
Kč209.37
HAVELPOL -2 - nová receptura

HAVELPOL -2 - nová receptura

eshop_000040/3
HAVELpol 2 is a pre-accelerated orthophthalic polyester resin for hand lamination or spraying. Curing requires peroxide K1 or Butanox M50 (100:1-3 ratio). Pot Life is 26 min at 20°C. Cures in 24 hours at 20°C; post-cure options available.
Kč346.99
Herex C71.75, tl. 9 mm, 2150 x 1000

Herex C71.75, tl. 9 mm, 2150 x 1000

eshop_009052/6
Cured PVC foam for sandwich structures with high thermal resistance. Size: 2150x1000 mm. Suitable for laminating with polyester, vinylester, or epoxy. High stiffness at low weight. Can be shaped in 2D and 3D at elevated temperatures. Specific weight: 80 kg/m3.
Kč920.19
LH 260 s odpěnovačem

LH 260 s odpěnovačem

eshop_112218/1
Epoxy resin LH 260 with silicone-free defoamer, low viscosity, high mechanical properties, good chemical resistance, and excellent thermal properties. Suitable for laminating with glass, carbon, and Kevlar fibers. Can be pigmented. Key properties: liquid state, weight equivalent 176-184 g/mol, max Gardner color 3, epoxy index 0.53-0.58, flash point...
Kč531.47
MYCELL 60 M tl. 1,2mm, 1225x1150 mm (70.55)

MYCELL 60 M tl. 1,2mm, 1225x1150 mm (70.55)

eshop_900972/3
PVC foam sandwich board with an open cell surface, ideal for hand laminating, vacuuming, and prepreg. The core creates a sandwich structure, enhancing stiffness while minimizing weight.
Kč478.83
MYCELL 60 M tl. 1,5mm, 1225x1150mm (70.55)

MYCELL 60 M tl. 1,5mm, 1225x1150mm (70.55)

eshop_900972/4
PVC foam sandwich board with an open cell surface, ideal for hand laminating, vacuuming, and prepreg. Creates a sandwich structure that enhances stiffness while minimizing weight.
Kč397.14
MYCELL 60 M tl. 2 mm, 1225x1150mm (70.55)

MYCELL 60 M tl. 2 mm, 1225x1150mm (70.55)

eshop_900972/5
Sandwich foam board made of PVC foam with an open cell surface. Ideal for hand laminating, vacuuming, and prepreg. The core creates a sandwich structure, enhancing product stiffness with minimal weight increase.
Kč397.14
MYCELL 80 M tl.1,2mm, 1090x1020mm(70.75)

MYCELL 80 M tl.1,2mm, 1090x1020mm(70.75)

eshop_900972/6
PVC foam sandwich board with an open cell surface, ideal for hand laminating, vacuuming, and prepreg. Creates a sandwich structure that enhances stiffness while minimizing weight.
Kč698.96
Parabeam tl. 6 mm, 905g/m2, šíře 127 cm(Paratank)

Parabeam tl. 6 mm, 905g/m2, šíře 127 cm(Paratank)

eshop_009022/a
Three-dimensional glass fabric with two layers connected by special fibers, creating a sandwich structure. PARATANK features internal channels, ideal for manufacturing and protecting tankers or tanks.
Kč1,082.70
Peroxid SF 10 - MGS

Peroxid SF 10 - MGS

eshop_000012
Peroxide for curing MGS gelcoats SF 30, T 30, T 35, T 3 PU, applied by spraying.
Kč2,150.47
Polyesterová pryskyřice Havelpol H 834 - REA 30W

Polyesterová pryskyřice Havelpol H 834 - REA 30W

eshop_000040/32
Polyester resin H 834 is a medium-reactive, thixotropic, pre-accelerated resin with controlled exotherm and low shrinkage, suitable for boat production and composite parts. It offers excellent mechanical properties, high HDT of 95°C, and good hydrolytic stability. Contains 66% non-volatile substances, reducing styrene emissions without losing adhesion....
Kč316.25
Polyesterová pryskyřice Polylite 32032-20

Polyesterová pryskyřice Polylite 32032-20

eshop_900493
Colorless, clear, accelerated, UV-stabilized orthophthalic resin (POLYLITE® 32032-20) with low viscosity. Ideal for applications requiring extreme purity and clarity, such as advertising items and encapsulating biological preparations. Same refractive index as glass. Recommended catalyst: Peroxide K1 (1-1.5%).
Kč499.62
Polyesterová pryskyřice průzračná licí

Polyesterová pryskyřice průzračná licí

eshop_010288/1
Colorless, clear, UV-stabilized orthophthalic resin with low viscosity. Ideal for applications requiring extreme purity and clarity. Same refractive index as glass. Recommended for advertising items, encapsulating biological preparations, and casting orgonites. Features include acrylic modification, easy air release, and stable quality.
Kč435.57
Home
Product added to wishlist
Product added to compare.

iqitcookielaw - module, put here your own cookie law text