Home

FMS - plnič pórů

FMS - plnič pórů

eshop_002029/1
FMS is a mold pore filler suitable for polyester, epoxy, and other resins. It effectively fills pores in new and older molds, enhancing release properties when used with Frekote products. Applied at room temperature with a lint-free cloth, it requires 1-3 layers, each drying for 15-20 minutes.
Kč3,197.59
Formula Five - separační vosk-1ks -340g

Formula Five - separační vosk-1ks -340g

eshop_002046
FORMULA FIVE is a versatile release wax combining carnauba wax with modern polymers and silicone for easy application. Ideal for use with FORMULA FIVE Clean ‘N Glaze, it ensures smooth release from molds. Suitable for porous molds after sealing, it requires a clean, dry surface. Apply in thin layers, polish to a high gloss, and wait an hour before...
Kč603.94
Frekote 700 NC - separátor

Frekote 700 NC - separátor

eshop_002030
Semipermanent polymer separator for multiple uses, suitable for all thermosets and most moldable polymers. Cures at room temperature, providing a high gloss finish. Application temperature range: up to 130°C.
Kč1,677.13
Frekote B 15 - základový separátor

Frekote B 15 - základový separátor

eshop_002029
B-15 pore filler effectively fills micropores and scratches on mold surfaces, enhancing release properties when used with Frekote products. Apply in thin layers, allowing 30 minutes of drying time between layers, with final curing taking at least 24 hours.
Kč5,124.35
Frekote NC 770 - separátor

Frekote NC 770 - separátor

eshop_002055/2
Frekote separator 770-NC is a high-slip release agent for mold geometry issues, curing quickly at room temperature to create a glossy surface. Apply up to 4 layers, drying each for 5-10 minutes. Temperature resistance up to 400°C.
Kč1,740.81
Havel Wax 60-x3, 450g

Havel Wax 60-x3, 450g

eshop_900137
Universal release wax paste for polyester and epoxy resins, suitable for models, new tools, and continuous production. Enables multiple releases from established tools at temperatures up to 140°C.
Kč821.36
HAVELex 1

HAVELex 1

eshop_002042/2
Special filler that increases viscosity and reduces resin bulk density. Made from special plastic for greater strength and toughness compared to microballoons or Aerosil. Sold by kg, approx. 25g = 1l. White color. Mechanical mixing available upon request.
Kč3,733.46
Mikrobalony odlehčené

Mikrobalony odlehčené

eshop_002044
Microballoons are miniature hollow glass spheres used for thickening resins, allowing for larger applications without running. They increase resin volume without significantly affecting weight and help reduce reaction temperature during curing, preventing defects. Bulk density: 0.08 g/cm3, Density: 0.13 g/cm3.
Kč541.72
Mikrobalony standardní

Mikrobalony standardní

eshop_002043
Microballoons are miniature hollow glass spheres used to thicken resins, allowing for application in larger quantities without running. They increase resin volume without significantly affecting weight and help reduce reaction temperature during curing, preventing defects.
Kč541.72
Mikroceluloza-prach - bílá

Mikroceluloza-prach - bílá

eshop_002041
A cost-effective filler for thickening all resins, ideal for applications requiring larger quantities without running. Mixes well with chopped glass fibers, aerosil, or microballoons. Fiber length: +/- 0.1 mm; Diameter: +/- 0.02 mm.
Kč218.88
Sekaná skelná vlákna 0,2 mm

Sekaná skelná vlákna 0,2 mm

eshop_002050
Very fine filler for epoxy and polyester resins with a grain size of 0.2mm. Enhances mechanical properties while maintaining transparency.
Kč467.05
Separační vosk TR 104 397g

Separační vosk TR 104 397g

eshop_002034
Quality wax-based separator, 397g. Suitable for higher temperatures. TR 104 can be replaced by TR 216. Not suitable as a base layer under PVA due to blooming.
Kč809.28
Separační základový vosk

Separační základový vosk

eshop_002028
Highly effective base wax for non-wettable surfaces like laminate molds and silicone. Improves wettability and creates a glossy release layer. Usable up to 100°C, suitable under PVA separator. Apply 3-6 layers on clean surfaces; renew after three releases for used molds. Available in 1 or 4 kg packaging.
Kč529.27
Separátor - FREWAX

Separátor - FREWAX

eshop_900043
Frewax is a wax and polymer-based separator that combines the ease of application with reusability. Shake before use, apply to a clean surface with a lint-free cloth, let dry for 5-10 minutes, and polish to a high gloss. Four layers are recommended.
Kč1,953.11
Separátor MAT ultra 41-90

Separátor MAT ultra 41-90

eshop_100020/1
MAT ultra 41-90 is a semi-permanent separator providing a matte finish on demolded parts. Apply 4-5 layers on a clean mold, drying for 15 minutes between layers and 30 minutes for full curing.
Kč2,876.96
Home
Product added to wishlist
Product added to compare.

iqitcookielaw - module, put here your own cookie law text