Home

Etikety pro vlaminování A4 (rohož)

eshop_010218

Thinner mat for label production, easily printable and impregnated, revealing a translucent print protected by resin. Ideal for laser printers.

Kč36.24

Katalyzátor k HT 33

eshop_710125/c

Catalyst for liquid silicone resin suitable for casting molds and products. Achieves Shore hardness 33 after curing. Mixing ratio 1:1, workability 20 minutes, curing time 3 hours. Requires silicone HT 33.

Kč1,827.20

Katalyzátor k HT 45

eshop_710146/a

Liquid catalyst for casting molds and products with a processing time of 10 minutes and a demolding time of 1:20 hours. Viscosity: 8,000 cPs, Shore hardness 45 after curing. Mixing ratio 1:1 (by weight). Order with Liquid Silicone HT 45 transparent. Thixotropic agent available for thin coatings.

Kč1,581.23

Katalyzátor k ZA 13

eshop_710123/a

Catalyst for liquid silicone resin, ideal for small and complex molds. Soft yet flexible, achieving Shore hardness 13 after curing. Mixing ratio 1:1, with 45 minutes workability and 4 hours curing time. Requires silicone ZA 13.

Kč1,803.77

Katalyzátor k ZA 22

eshop_710124/b

Catalyst for blue silicone resin with a processing time of 15 minutes and a demolding time of 1 hour. Achieves Shore hardness 22 after curing. Mixing ratio 1:1 (by weight). Silicone ZA 22 sold separately. Can use retarder to extend processing time and thixotropic agent for thickening.

Kč1,751.43

Rohož ze skelných vláken - vzor aramid - uhlík. - CF 702 š. 100cm

eshop_540022

Glass mat base (30g/m2) with an additional weight of 5-10g/m2 after printing. Custom design options available upon request.

Kč173.35

Rohož ze skelných vláken - vzor cihla - VS 302 BW š. 100cm

eshop_540021

Glass mat base (30g/m2) with an additional weight of 5-10g/m2 after printing. Custom design options available upon request.

Kč167.93

Rohož ze skelných vláken - vzor mramor - světlý - MG 202 W š. 100cm

eshop_540024

Glass mat base 30g/m2, weight increases by 5 - 10 grams/m2 after printing. Multiple designs available upon request.

Kč162.52

Rohož ze skelných vláken - vzor mramor - tmavě šedý MG 209 š. 100cm

eshop_540020

Glass mat base (30g/m2) with an additional weight of 5-10g/m2 after printing. Custom design options available upon request.

Kč162.52

Skelná rohož 100 g/m2 emulzní, š.125 cm

eshop_500006/1

Glass mat for the first layer on gelcoat, ideal for complex shapes. Emulsion binder based on PVA dissolves quickly in styrene, suitable for laminates with all types of unsaturated polyester resins.

Kč320.46

Skelná rohož 30 g/m2, šíře 100 cm

eshop_004060

Flexible material ideal for first and last layers of finished parts and molds, suitable for complex shapes. Designed for polyester and epoxy impregnation, with a thickness of approx. 0.03-0.5 mm.

Kč73.13

Skelná rohož 300g/m2 š.125 cm - prášková

eshop_500000

Suitable for products made from polyester, vinylester, and epoxy resins.

Kč166.69

Skelná rohož 300g/m2, š. 1270 mm - sešívaná polyesterovým vláknem

eshop_540011

Chopped glass fiber mat stitched with polyester fibers, allowing for pre-shaping into complex forms. Quick saturation without binder, compatible with epoxy resin.

Kč210.10

View

Skelná rohož 450g/m2 š.125 cm - prášková

eshop_500001

Glass non-woven reinforcement for polyester, vinylester, and epoxy resins. Softens upon saturation, conforming well to mold shapes. Sold by weight (1 kg ≈ 2.2 m²).

Kč120.79

Skelná rohož 450g/m2,emulzní š.125cm

eshop_540035/a

Glass non-woven reinforcement made of interwoven short fibers, ideal for polyester resin products. Softens upon saturation and conforms to mold shapes. Sold by weight, one kg approximately 2.2m2.

Kč120.79

Skelná rohož 600 g/m2 š. 125 cm - emulzní

eshop_500003/1

Emulsion mats made from PVA (polyvinyl alcohol) dissolve quickly in styrene, making them ideal for producing geometrically complex products and suitable for laminates with all types of unsaturated polyester resins.

Kč113.47

Skelná rohož 600g/m2, š.130 cm - sešívaná polyesterovým vláknem

eshop_540013

Chopped glass fiber mat stitched with polyester fiber, allowing for pre-shaping into complex forms. Quick saturation without binder, compatible with epoxy resin.

Kč204.97

Skelná rohož emulzní 150g/m2,š.125 cm

eshop_500006

Kč238.28

Skelná rohož emulzní 225g/m2,š.125 cm

eshop_500008

Kč231.91

Skelná rohož emulzní 300g/m2,š. 125 cm

eshop_500005

Kč101.46

Tekutý silikon HT 33 - transparent LT

eshop_710125

Liquid silicone resin for casting molds and products, offering flexibility and tear resistance. Suitable for larger or less complex molds, achieving Shore hardness 33 after curing. Mixing ratio 1:1, with a workability of 20 minutes and curing time of 3 hours. Requires a separate catalyst for HT 33.

Kč1,827.20

Tekutý silikon HT 45 - transparent

eshop_710146

Liquid transparent silicone resin for casting molds and products with a processing time of 10 minutes and a demolding time of 1 hour 20 minutes. Achieves Shore A hardness of 45 after curing. Mixing ratio 1:1 (by weight). Catalyst sold separately.

Kč1,581.23

Tekutý silikon ZA 13 - transparent

eshop_710123

Liquid silicone resin for casting molds and products, soft yet flexible and tear-resistant. Suitable for small and complex molds, achieving Shore A hardness of 13 after curing. Mixing ratio 1:1, workability 45 minutes, curing time 4 hours. Catalyst required.

Kč1,803.77

Tekutý silikon ZA 22 - BLUE

eshop_710124

Liquid blue silicone resin for casting molds and products with a processing time of 15 minutes and a demolding time of 1 hour. Achieves Shore hardness 22 after curing. Mixing ratio 1:1 (by weight). Catalyst sold separately. Thixotropic agent available for thin coatings.

Kč1,739.35