Home

Showing 121-144 of 166 item(s)

Strhávací tkanina 83 g/m2, Š. 30 cm ( J)

eshop_010122/47

Roller with a handle for removing air bubbles from laminate.

Kč89.68

Strhávací tkanina 83 g/m2, Š. 50 cm ( J)

eshop_010122/49

A new roller designed for bubble release in thicker laminates, featuring crosswise and longitudinal grooving for effective use with fiberglass laminates.

Kč143.48

Strhávací tkanina 83g/m2, š. 100 cm ( J )

eshop_010122/28

Kč143.48

Strhávací tkanina 83g/m2, š.150cm ( J )

eshop_010122/25

Cured polyvinyl chloride foam for sandwich structures, 1130x2430 mm. Suitable for laminating and bonding with polyester, vinylester, or epoxy.

Kč143.48

Strhávací tkanina 83g/m2, š.3 cm (J)

eshop_010122/31

Kč82.50

Strhávací tkanina 83g/m2, š.5 cm ( J )

eshop_010122/32

Thin hooded coverall made of 60g/m2 non-woven fabric, offering short-term protection against diluted chemical splashes. Antistatic and dust-resistant, compliant with F 1006Aa, ČSN EN 340, EN 1149-5, CE 1023.

Kč86.09

Sudový kohout FLO-KING plastový - velký

eshop_010165/1

Polyethylene drain valve for discharging larger quantities from metal barrels. Smaller version available for smaller amounts.

Kč1,125.16

Sudový kohout FLO-RITE plastový - malý

eshop_010165/2

Small polyethylene drain valve for draining smaller amounts of materials from metal barrels. Larger drain valve available for larger quantities.

Kč137.99

Svorkový ventil pro infuze

eshop_900920

Threaded valve for securing input and output hoses in vacuum and infusion composite manufacturing. Made of metal for durability and reusability, it prevents contamination and tightens hoses with external pressure.

Kč1,225.45

Tekutý silikon HT 33 - transparent LT

eshop_710125

Liquid silicone resin for casting molds and products, offering flexibility and tear resistance. Suitable for larger or less complex molds, achieving Shore hardness 33 after curing. Mixing ratio 1:1, with a workability of 20 minutes and curing time of 3 hours. Requires a separate catalyst for HT 33.

Kč1,827.20

Tekutý silikon HT 45 - transparent

eshop_710146

Liquid transparent silicone resin for casting molds and products with a processing time of 10 minutes and a demolding time of 1 hour 20 minutes. Achieves Shore A hardness of 45 after curing. Mixing ratio 1:1 (by weight). Catalyst sold separately.

Kč1,581.23

Tekutý silikon ZA 13 - transparent

eshop_710123

Liquid silicone resin for casting molds and products, soft yet flexible and tear-resistant. Suitable for small and complex molds, achieving Shore A hardness of 13 after curing. Mixing ratio 1:1, workability 45 minutes, curing time 4 hours. Catalyst required.

Kč1,803.77

Tekutý silikon ZA 22 - BLUE

eshop_710124

Liquid blue silicone resin for casting molds and products with a processing time of 15 minutes and a demolding time of 1 hour. Achieves Shore hardness 22 after curing. Mixing ratio 1:1 (by weight). Catalyst sold separately. Thixotropic agent available for thin coatings.

Kč1,739.35

Těsnící páska na vakuování LSM1310,12mm x 2,5mm x 15m do 110 °C

eshop_900247

Versatile sealing tape for curing up to 110 °C, ideal for composite or metal tools. Easy release and excellent adhesion.

Kč304.53

Těsnící páska na vakuování LSM6000,13mm x 3mm x13m do 90°C

eshop_900248

Versatile sealing tape for room temperature applications, withstands exothermic temperatures up to 90 °C. Ideal for composite or metal tools, featuring low tack, excellent adhesion, and cost-effectiveness.

Kč298.82

Těsnící páska pro vakuování tl.3 mm , š.12mm (1ks - 15mb) - do 90°C - R&G

eshop_010208

(1 pcs - 15 mb)

Kč285.50

Tixotropní přísada pro silikony - Additix 54 - bal. 50g

eshop_900272/1

Thixotropic agent for silicone prevents dripping on vertical surfaces. Recommended addition is 3-5%. Not classified as hazardous.

Kč296.48

Tlaková rychlospojka čep/matka typ EPF20 1/4 k stříkací pistoli

eshop_700149

Pressure quick coupling for spray guns, connects to pressure hoses. ESF 20 counterpart sold separately.

Kč29.87

Tmelící jíl - plastelína

eshop_010256

Sealing clay putty for minor repairs and adjustments of molds and models. Highly temperature resistant, does not melt during curing. Original packaging: 2.5 kg, divided into five packages of 4 pieces (2x2x13.5 cm, 125g each). Color: ochre.

Kč801.59

Tmelící jíl - plastelína (EXTRA SOFT)

eshop_010256/9

Filler clay - putty is ideal for minor repairs and adjustments of molds and models. It effectively repairs chipped edges and seals gaps in multi-part molds, and is highly heat resistant, maintaining its integrity during curing and production processes.

Kč244.80

Tužidlo k PUR 2K a 3K sl.B

eshop_010298/4

Isocyanate hardener for PUR 2K 45 and 3K 90 with specific properties. REACH regulation requires training for users of diisocyanates starting August 24, 2023. Havel Composites offers a digital training platform for safe handling. More info: http://www.safeusediisocyanates.eu/.

Kč510.24

Uhlíkové trubky 10x8x1000 mm

eshop_010169/2

Carbon tubes made by pultrusion with precise dimensions and smooth surfaces. Continuous production allows for long profiles, cut to specific lengths for handling. Made with high-quality epoxy resin, offering high thermal resistance and mechanical strength. Weight: 36 g/m.

Kč567.70

uhlíkové trubky 6x4x1000 mm

eshop_010130/3a

Carbon tubes made by pultrusion with precise dimensions and smooth surfaces. Continuous production allows for long profiles, cut to specific lengths for convenience. Made with high-quality epoxy resin, cured at 120°C for high thermal resistance and mechanical strength. Weight: 23g/m.

Kč585.27