Home

Showing 121-144 of 223 item(s)

Skelná punčocha průměr 60 mm, 060.1444022136-S (3746)- 20 g/bm

eshop_008016

Diameter 60 mm, fiber orientation at 45°, weight 20.00 g/m, suitable for tubes 12-75 mm.

Kč33.02

Skelná punčocha průměr 80 mm, 080.14440224408-S (4029) - 269,2 g/bm

eshop_008017/5

Weight: 269.2 g/bm

Kč300.14

Skelná punčocha průměr 80 mm, 080.1445022300 - S (4035) - 44,2 g/bm

eshop_008017/2

Weight: 44.2 g/bm

Kč66.31

Sklo-uhlíková punčocha 32 mm,10040302136-ASC - sklo barvené na červeno

eshop_008004/1

Kč249.12

Sklo-uhlíková punčocha průměr 50 mm, 050.12040222136- KCS1

eshop_008002/1

Glass sleeve with 8 carbon fibers, weight 35.10 g/mb.

Kč63.03

View

Tekutý silikon HT 33 - transparent LT

eshop_710125

Liquid silicone resin for casting molds and products, offering flexibility and tear resistance. Suitable for larger or less complex molds, achieving Shore hardness 33 after curing. Mixing ratio 1:1, with a workability of 20 minutes and curing time of 3 hours. Requires a separate catalyst for HT 33.

Kč1,827.20

Tekutý silikon HT 45 - transparent

eshop_710146

Liquid transparent silicone resin for casting molds and products with a processing time of 10 minutes and a demolding time of 1 hour 20 minutes. Achieves Shore A hardness of 45 after curing. Mixing ratio 1:1 (by weight). Catalyst sold separately.

Kč1,581.23

Tekutý silikon ZA 13 - transparent

eshop_710123

Liquid silicone resin for casting molds and products, soft yet flexible and tear-resistant. Suitable for small and complex molds, achieving Shore A hardness of 13 after curing. Mixing ratio 1:1, workability 45 minutes, curing time 4 hours. Catalyst required.

Kč1,803.77

Tekutý silikon ZA 22 - BLUE

eshop_710124

Liquid blue silicone resin for casting molds and products with a processing time of 15 minutes and a demolding time of 1 hour. Achieves Shore hardness 22 after curing. Mixing ratio 1:1 (by weight). Catalyst sold separately. Thixotropic agent available for thin coatings.

Kč1,739.35

Tixotropní přísada pro silikony - Additix 54 - bal. 50g

eshop_900272/1

Thixotropic agent for silicone prevents dripping on vertical surfaces. Recommended addition is 3-5%. Not classified as hazardous.

Kč296.48

Tužidlo 133 (MGS)

eshop_001017

Hardener for epoxy resin with a mixing ratio of 100:35 (weight) or 100:40 (volume). Working time is 10-15 minutes at 20°C. Minimum order is 25kg.

Kč933.36

Tužidlo 134 (MGS)

eshop_001018

Hardener for epoxy resin L 135, L 160, L, LR, LR 100, LH 160. Mixing ratio: 100:35 (weight) or 100:40 (volume). Processing time for 100g at 20°C is 20 min. Refer to technical data sheets MGS for detailed instructions.

Kč819.90

View

Tužidlo 135 (MGS)

eshop_001008/1

Hardener for epoxy resin L 135, L 160, L, LR, LR 100, LH 160. Mixing ratio: 100:35 (weight) or 100:40 (volume). Working time: 25-30 min for 100g at 20°C. More info at http://www.momentive.com/

Kč819.90

Tužidlo 136 (MGS)

eshop_001019

Hardener for epoxy resin L 135, L 160, L, LR, LR 100, LH 160. Mixing ratio: 100:35 (weight) or 100:40 (volume). Working time for 100g at 20°C: 1 - 2 hours. More info at http://www.momentive.com/

Kč948.74

Tužidlo 285 (MGS)

eshop_001009

Hardener for epoxy resin 285 with a mixing ratio of 100:40 (weight) / 100:50 (volume). Processing time is 50 minutes for 100g at 20°C. Available in 25 and 200 kg packaging. More info at http://www.momentive.com/

Kč1,172.74

Tužidlo 286 (MGS)

eshop_001010

Hardener for epoxy resin 285 with a mixing ratio of 100:40 (weight) / 100:50 (volume). Processing time is 2 hours at 20°C for 100g. Available in 25 kg and 200 kg packaging. More info at http://www.momentive.com/

Kč1,156.27

Tužidlo 287 (MGS)

eshop_001011

Hardener for epoxy resin 285 with a mixing ratio of 100:40 (weight) / 100:50 (volume). Processing time is 4 hours at 20°C for 100g. Available in 25 kg and 200 kg packaging. More info at http://www.momentive.com/

Kč1,583.95

Tužidlo 7067 do gelcoatu

eshop_900883

Hardener for transparent gelcoat 7060.

Kč1,434.82

Tužidlo C

eshop_001030

Hardener for epoxy resin C with a mixing ratio of 100:60 (by weight) and a processing time of 50 minutes. See R+G Handbook p. 77/78 for details.

Kč812.58

Tužidlo H 10

eshop_111070

Hardener H 10 is designed for curing epoxy systems with enhanced UV stability for applications like casting, laminating, and coatings. It works at temperatures as low as 10°C and offers excellent smoothness. Suitable for laminates with glass fabrics, with a mixing ratio of 100:45-50. Not recommended for clear castings or jewelry.

Kč566.61

Tužidlo H 100 do epoxidového stříkacího gelcoatu EG 100-W a EG 100-T

eshop_001046

Hardener for epoxy gelcoats, mixed in specific ratios for EG 100 T and EG 100 W. Ensure thorough mixing and avoid exposure to weather or chemicals until fully cured.

Kč1,200.56

Tužidlo H 10A

eshop_111224

Hardener H 10A is a liquid modified adduct hardener suitable for clear laminating systems, particularly for visible layers. It has a processing time of 30-40 minutes and is compatible with various epoxy resins. The cured composite is not brittle, with a gel time of 3-5 hours in a 1mm thick layer.

Kč659.58

Tužidlo H 10B

eshop_111227

Hardener combined with LH 160 and LH 210 in a 100:47 ratio, ideal for self-adhesive labels. Achieves a bubble-free surface in 1-2mm layers and becomes non-sticky after 16-24 hours, resulting in a clear, flexible composite.

Kč581.98

Tužidlo H 145 (HAVEL)

eshop_111032

Mixing ratio 100:33, working time 50 min. Requires tempering to at least 50°C.

Kč579.78

Product added to wishlist

Product added to compare.

iqitcookielaw - module, put here your own cookie law text