Tužidlo H 10

Hardener H 10 is used for curing epoxy systems with increased UV stability*, primarily for casting, laminating, coating, and adhesive epoxy systems. Processing can take place at temperatures as low as 10°C. The advantages of the products include excellent smoothness and good surface properties. Applications include industrial floors, primers, surfaces, and laminate production. To achieve the best properties, it is advisable to temper the product, although curing will also occur at 25°C. Suitable for laminate production with glass fabrics from Porcher or Interglass. Production of laminates requiring clarity. Mixing ratios of resin to hardener are 100:45-50. Recommended resins: LH 130, LH 145, LH 160, LH 210, LH 1000. Workability at 25°C is approximately 15-25 minutes. The product is not suitable for producing clear castings and jewelry. * Increased UV stability is achieved through proper curing and subsequent tempering. UV stabilization mitigates signs of aging due to UV exposure but cannot completely prevent them. Any use with an emphasis on UV stability should be consulted with our technical department. More in the Technical Data Sheet.