Home

HAVELcore soft, tl.5mm,š.1000mm (1725)

HAVELcore soft, tl.5mm,š.1000mm (1725)

eshop_800003
Havelcore is a flexible sandwich material similar to Coremat XX, made of polyester fibers and expanded microbeads. It has a surface weight of 85-100 g/m2, thickness of 3.8-4.7 mm, and resin consumption of 2.1-2.3 kg/m2. Available in rolls of 100 cm width and 50 m length, with thickness options of 2.3, 4, and 5 mm.
Kč289.89
HAVELex 1

HAVELex 1

eshop_002042/2
Special filler that increases viscosity and reduces resin bulk density. Made from special plastic for greater strength and toughness compared to microballoons or Aerosil. Sold by kg, approx. 25g = 1l. White color. Mechanical mixing available upon request.
Kč3,733.46
Herex C71.75, tl. 9 mm, 2150 x 1000

Herex C71.75, tl. 9 mm, 2150 x 1000

eshop_009052/6
Cured PVC foam for sandwich structures with high thermal resistance. Size: 2150x1000 mm. Suitable for laminating with polyester, vinylester, or epoxy. High stiffness at low weight. Can be shaped in 2D and 3D at elevated temperatures. Specific weight: 80 kg/m3.
Kč920.19
Mikrobalony odlehčené

Mikrobalony odlehčené

eshop_002044
Microballoons are miniature hollow glass spheres used for thickening resins, allowing for larger applications without running. They increase resin volume without significantly affecting weight and help reduce reaction temperature during curing, preventing defects. Bulk density: 0.08 g/cm3, Density: 0.13 g/cm3.
Kč541.72
Mikrobalony standardní

Mikrobalony standardní

eshop_002043
Microballoons are miniature hollow glass spheres used to thicken resins, allowing for application in larger quantities without running. They increase resin volume without significantly affecting weight and help reduce reaction temperature during curing, preventing defects.
Kč541.72
Mikroceluloza-prach - bílá

Mikroceluloza-prach - bílá

eshop_002041
A cost-effective filler for thickening all resins, ideal for applications requiring larger quantities without running. Mixes well with chopped glass fibers, aerosil, or microballoons. Fiber length: +/- 0.1 mm; Diameter: +/- 0.02 mm.
Kč218.88
MYCELL 60 M tl. 1,2mm, 1225x1150 mm (70.55)

MYCELL 60 M tl. 1,2mm, 1225x1150 mm (70.55)

eshop_900972/3
PVC foam sandwich board with an open cell surface, ideal for hand laminating, vacuuming, and prepreg. The core creates a sandwich structure, enhancing stiffness while minimizing weight.
Kč478.83
MYCELL 60 M tl. 1,5mm, 1225x1150mm (70.55)

MYCELL 60 M tl. 1,5mm, 1225x1150mm (70.55)

eshop_900972/4
PVC foam sandwich board with an open cell surface, ideal for hand laminating, vacuuming, and prepreg. Creates a sandwich structure that enhances stiffness while minimizing weight.
Kč397.14
MYCELL 60 M tl. 2 mm, 1225x1150mm (70.55)

MYCELL 60 M tl. 2 mm, 1225x1150mm (70.55)

eshop_900972/5
Sandwich foam board made of PVC foam with an open cell surface. Ideal for hand laminating, vacuuming, and prepreg. The core creates a sandwich structure, enhancing product stiffness with minimal weight increase.
Kč397.14
MYCELL 80 M tl.1,2mm, 1090x1020mm(70.75)

MYCELL 80 M tl.1,2mm, 1090x1020mm(70.75)

eshop_900972/6
PVC foam sandwich board with an open cell surface, ideal for hand laminating, vacuuming, and prepreg. Creates a sandwich structure that enhances stiffness while minimizing weight.
Kč698.96
Parabeam tl. 6 mm, 905g/m2, šíře 127 cm(Paratank)

Parabeam tl. 6 mm, 905g/m2, šíře 127 cm(Paratank)

eshop_009022/a
Three-dimensional glass fabric with two layers connected by special fibers, creating a sandwich structure. PARATANK features internal channels, ideal for manufacturing and protecting tankers or tanks.
Kč1,082.70
Rohacell 51 IG-F 7mm 2500x1250 mm

Rohacell 51 IG-F 7mm 2500x1250 mm

eshop_009075/50
ROHACELL® IG-F is a hardened acrylic foam (polymethacrylimide) with excellent mechanical properties, suitable for automotive, watercraft, and medical applications. It features minimal resin absorption, lower weight, and cost efficiency. Ideal for prepreg processing and resin infusion up to 130 °C and 0.3 MPa. Board size: 2500x1250 mm, bulk density: 51 kg/m2.
Kč1,429.69
Rohacell IG 110, 3 mm.

Rohacell IG 110, 3 mm.

eshop_009074/8
Hardened acrylic foam (polymethacrylimide) with excellent mechanical properties, temperature resistance up to 180°C, and X-ray penetration capability. Dimensions: 2160x1100 mm, Bulk density: 110 kg/m2.
Kč8,623.55
Rohacell IG 31, 5 mm.

Rohacell IG 31, 5 mm.

eshop_009074/06
Hardened acrylic foam (polymethacrylimide) with excellent mechanical properties, temperature resistance up to 180°C, and X-ray penetration capability. Dimensions: 1250x625 mm, density: 31 kg/m2. Available on order.
Kč2,547.53
Sekaná skelná vlákna 0,2 mm

Sekaná skelná vlákna 0,2 mm

eshop_002050
Very fine filler for epoxy and polyester resins with a grain size of 0.2mm. Enhances mechanical properties while maintaining transparency.
Kč467.05
Separační vosk TR 104 397g

Separační vosk TR 104 397g

eshop_002034
Quality wax-based separator, 397g. Suitable for higher temperatures. TR 104 can be replaced by TR 216. Not suitable as a base layer under PVA due to blooming.
Kč809.28
Separační základový vosk

Separační základový vosk

eshop_002028
Highly effective base wax for non-wettable surfaces like laminate molds and silicone. Improves wettability and creates a glossy release layer. Usable up to 100°C, suitable under PVA separator. Apply 3-6 layers on clean surfaces; renew after three releases for used molds. Available in 1 or 4 kg packaging.
Kč529.27
Separátor - FREWAX

Separátor - FREWAX

eshop_900043
Frewax is a wax and polymer-based separator that combines the ease of application with reusability. Shake before use, apply to a clean surface with a lint-free cloth, let dry for 5-10 minutes, and polish to a high gloss. Four layers are recommended.
Kč1,953.11
Separátor MAT ultra 41-90

Separátor MAT ultra 41-90

eshop_100020/1
MAT ultra 41-90 is a semi-permanent separator providing a matte finish on demolded parts. Apply 4-5 layers on a clean mold, drying for 15 minutes between layers and 30 minutes for full curing.
Kč2,876.96
Separátor PVA - ECO (po 1l)

Separátor PVA - ECO (po 1l)

eshop_002023/2
PVA Separator - ECO is a liquid product that prevents sticking between materials, ideal for separating composite and metal molds. It can be combined with a base wax and is applied with a sponge. Suitable for various applications.
Kč277.81
Separátor PVA - ECO modré (po 1l)

Separátor PVA - ECO modré (po 1l)

eshop_002023/3
PVA - ECO separator is a liquid product that prevents sticking of materials, ideal for separating composite and metal molds. It can be combined with a base wax and is suitable for almost all applications. Applied with a sponge, it is transparent blue in color.
Kč265.73
Separátor PVA - natírací R+G

Separátor PVA - natírací R+G

eshop_002024
Separator for epoxy, vinylester, and polyester resins up to 100°C. Use release wax for the primary layer. Apply with a brush (item no. 165 110). After drying, a shiny surface appears, and residues can be washed off with water.
Kč609.07
Separátor QV 5110 - Vantico

Separátor QV 5110 - Vantico

eshop_002032
Wax-based paste separator containing solvents for model building. Apply in a thin layer, let dry for 30 minutes, then polish. Suitable for molding up to 130°C.
Kč1,619.29
Separátor RA-57

Separátor RA-57

eshop_900533
RA-57 is a multipurpose liquid release agent that eliminates the need for repeated waxing and polishing. It forms a strong monomolecular film on molds, ensuring high separation efficiency without peeling. Silicone-free and suitable for gelcoat PC.
Kč1,110.37
Home
Product added to wishlist
Product added to compare.

iqitcookielaw - module, put here your own cookie law text