Home

HAVELinhibit 1

HAVELinhibit 1

eshop_100022
Material for extending gel-time, ideal for large or complex polyester and vinylester resin products, especially in summer. Recommended dosage: 0.1 - 0.6% (by weight).
Kč857.60
HAVELPOL - 2 - bílý 2%

HAVELPOL - 2 - bílý 2%

eshop_111195
HAVELpol 2 is a pre-accelerated polyester resin for hand lamination or spraying, ideal for colored products like bathtubs. Curing requires peroxide K1 or Butanox M50. Pot Life is 26 min at 20°C. Cures in 24 hours at 20°C; can be post-cured at higher temperatures.
Kč360.17
HAVELPOL - 4

HAVELPOL - 4

eshop_000040/5
HAVELpol 4 is a clear yellowish polyester resin suitable for hand laminating transparent parts and casting orgonites. Requires mixing with Accelerator-cobalt and Catalyst-peroxide for curing. Recommended workshop temperature is 18-22°C. Can be modified for slower reactions.
Kč354.31
HAVELPOL - 5 CLEAR neurychlená!

HAVELPOL - 5 CLEAR neurychlená!

eshop_000040/6
HAVELpol 5 polyester resin is ideal for producing strong parts that endure high loads. Requires catalyst and accelerator for curing. Mix Peroxide K1 or Butanox M50 (1-2% by weight) and Cobalt accelerator (1-2% by weight) separately. Curing time varies with temperature and additives.
Kč316.25
HAVELPOL -1

HAVELPOL -1

eshop_000040/2
Pre-accelerated, thixotropic, low-emission orthophthalic resin suitable for low-strength products. Recommended mixing ratio is 100:1-2. Order peroxides separately for lamination.
Kč209.37
HAVELPOL -2 - nová receptura

HAVELPOL -2 - nová receptura

eshop_000040/3
HAVELpol 2 is a pre-accelerated orthophthalic polyester resin for hand lamination or spraying. Curing requires peroxide K1 or Butanox M50 (100:1-3 ratio). Pot Life is 26 min at 20°C. Cures in 24 hours at 20°C; post-cure options available.
Kč346.99
Katalyzátor k HT 33

Katalyzátor k HT 33

eshop_710125/c
Catalyst for liquid silicone resin suitable for casting molds and products. Achieves Shore hardness 33 after curing. Mixing ratio 1:1, workability 20 minutes, curing time 3 hours. Requires silicone HT 33.
Kč1,827.20
Katalyzátor k HT 45

Katalyzátor k HT 45

eshop_710146/a
Liquid catalyst for casting molds and products with a processing time of 10 minutes and a demolding time of 1:20 hours. Viscosity: 8,000 cPs, Shore hardness 45 after curing. Mixing ratio 1:1 (by weight). Order with Liquid Silicone HT 45 transparent. Thixotropic agent available for thin coatings.
Kč1,581.23
Katalyzátor k ZA 13

Katalyzátor k ZA 13

eshop_710123/a
Catalyst for liquid silicone resin, ideal for small and complex molds. Soft yet flexible, achieving Shore hardness 13 after curing. Mixing ratio 1:1, with 45 minutes workability and 4 hours curing time. Requires silicone ZA 13.
Kč1,803.77
Katalyzátor k ZA 22

Katalyzátor k ZA 22

eshop_710124/b
Catalyst for blue silicone resin with a processing time of 15 minutes and a demolding time of 1 hour. Achieves Shore hardness 22 after curing. Mixing ratio 1:1 (by weight). Silicone ZA 22 sold separately. Can use retarder to extend processing time and thixotropic agent for thickening.
Kč1,751.43
LH 260 s odpěnovačem

LH 260 s odpěnovačem

eshop_112218/1
Epoxy resin LH 260 with silicone-free defoamer, low viscosity, high mechanical properties, good chemical resistance, and excellent thermal properties. Suitable for laminating with glass, carbon, and Kevlar fibers. Can be pigmented. Key properties: liquid state, weight equivalent 176-184 g/mol, max Gardner color 3, epoxy index 0.53-0.58, flash point...
Kč531.47
Peroxid SF 10 - MGS

Peroxid SF 10 - MGS

eshop_000012
Peroxide for curing MGS gelcoats SF 30, T 30, T 35, T 3 PU, applied by spraying.
Kč2,150.47
Pigmenatová pasta světle šedá 7035

Pigmenatová pasta světle šedá 7035

eshop_002011/4
Pigment paste is created by grinding pigment with resin, allowing for effective coloring with minimal amounts. For thin gelcoat layers, larger amounts may be needed, but this can affect the cured resin's properties. Recommended usage is up to 20%, with larger amounts requiring testing for strength changes.
Kč1,225.45
Pigmentová pasta žlutá dopravní RAL 1023

Pigmentová pasta žlutá dopravní RAL 1023

eshop_002002/10
Pigments for coloring polyester, epoxy, or polyurethane resins and gelcoats. The well-mixed pigment paste requires only a small amount for effective coloring, though larger amounts may affect cured resin properties. Recommended usage is up to 20%, with larger amounts needing testing for strength changes.
Kč4,084.84
Home
Product added to wishlist
Product added to compare.

iqitcookielaw - module, put here your own cookie law text