Home

Showing 229-240 of 761 item(s)

HAVELcore soft, tl.5mm,š.1000mm (1725)

eshop_800003

Havelcore is a flexible sandwich material similar to Coremat XX, made of polyester fibers and expanded microbeads. It has a surface weight of 85-100 g/m2, thickness of 3.8-4.7 mm, and resin consumption of 2.1-2.3 kg/m2. Available in rolls of 100 cm width and 50 m length, with thickness options of 2.3, 4, and 5 mm.

Kč289.89

HAVELex 1

eshop_002042/2

Special filler that increases viscosity and reduces resin bulk density. Made from special plastic for greater strength and toughness compared to microballoons or Aerosil. Sold by kg, approx. 25g = 1l. White color. Mechanical mixing available upon request.

Kč3,733.46

HAVELfiller E - elastický bílý polyesterový dvousložkový tmel , 1kg

eshop_800013/a

Elastic extra white polyester two-component filler for various substrates including cast iron, aluminum, zinc, and fiberglass. Suitable as both a filling and topcoat filler, sands well. Curing with included red hardener (100:2 ratio). Processing time: up to 5 minutes; sanding: 20-30 minutes.

Kč564.70

Havelgelcoat 65 - polyesterový bílý - natírací

eshop_000040/26

Havelgelcoat 65 is a pre-accelerated isophthalic gelcoat for mold application, suitable for marine, construction, and transportation industries. It offers excellent water and weather resistance. Activate with Butanox M50 (1-3%).

Kč511.85

Havelgelcoat 65 - polyesterový čirý - natírací

eshop_000040/55

Havelgelcoat 65 is a pre-accelerated isophthalic gelcoat for mold application, suitable for marine, construction, and transportation industries. It offers excellent resistance to water and weathering. Activate with Butanox M50 (1-3%).

Kč541.72

Havelgelcoat 97 - polyesterový čirý - natírací

eshop_000040/28

Havelgelcoat 97 is a pre-accelerated isophthalic gelcoat for mold application, offering excellent adhesion to epoxy resins and pre-pregs. Suitable for brush application and available in various colors, it is designed for both wet layup and vacuum infusion systems.

Kč497.79

HAVELinhibit 1

eshop_100022

Material for extending gel-time, ideal for large or complex polyester and vinylester resin products, especially in summer. Recommended dosage: 0.1 - 0.6% (by weight).

Kč857.60

HAVELPOL - 2 - bílý 2%

eshop_111195

HAVELpol 2 is a pre-accelerated polyester resin for hand lamination or spraying, ideal for colored products like bathtubs. Curing requires peroxide K1 or Butanox M50. Pot Life is 26 min at 20°C. Cures in 24 hours at 20°C; can be post-cured at higher temperatures.

Kč360.17

HAVELPOL - 4

eshop_000040/5

HAVELpol 4 is a clear yellowish polyester resin suitable for hand laminating transparent parts and casting orgonites. Requires mixing with Accelerator-cobalt and Catalyst-peroxide for curing. Recommended workshop temperature is 18-22°C. Can be modified for slower reactions.

Kč354.31

HAVELPOL - 5 CLEAR neurychlená!

eshop_000040/6

HAVELpol 5 polyester resin is ideal for producing strong parts that endure high loads. Requires catalyst and accelerator for curing. Mix Peroxide K1 or Butanox M50 (1-2% by weight) and Cobalt accelerator (1-2% by weight) separately. Curing time varies with temperature and additives.

Kč316.25

HAVELPOL -1

eshop_000040/2

Pre-accelerated, thixotropic, low-emission orthophthalic resin suitable for low-strength products. Recommended mixing ratio is 100:1-2. Order peroxides separately for lamination.

Kč209.37

HAVELPOL -2 - nová receptura

eshop_000040/3

HAVELpol 2 is a pre-accelerated orthophthalic polyester resin for hand lamination or spraying. Curing requires peroxide K1 or Butanox M50 (100:1-3 ratio). Pot Life is 26 min at 20°C. Cures in 24 hours at 20°C; post-cure options available.

Kč346.99

Product added to wishlist

Product added to compare.

iqitcookielaw - module, put here your own cookie law text