Home

Rohacell 51 IG-F 7mm 2500x1250 mm

Rohacell 51 IG-F 7mm 2500x1250 mm

eshop_009075/50
ROHACELL® IG-F is a hardened acrylic foam (polymethacrylimide) with excellent mechanical properties, suitable for automotive, watercraft, and medical applications. It features minimal resin absorption, lower weight, and cost efficiency. Ideal for prepreg processing and resin infusion up to 130 °C and 0.3 MPa. Board size: 2500x1250 mm, bulk density: 51 kg/m2.
Kč1,181.57
Rohacell IG 110, 3 mm.

Rohacell IG 110, 3 mm.

eshop_009074/8
Hardened acrylic foam (polymethacrylimide) with excellent mechanical properties, temperature resistance up to 180°C, and X-ray penetration capability. Dimensions: 2160x1100 mm, Bulk density: 110 kg/m2.
Kč7,126.90
Rohacell IG 31, 5 mm.

Rohacell IG 31, 5 mm.

eshop_009074/06
Hardened acrylic foam (polymethacrylimide) with excellent mechanical properties, temperature resistance up to 180°C, and X-ray penetration capability. Dimensions: 1250x625 mm, density: 31 kg/m2. Available on order.
Kč2,105.40
Rohacell IG 51, 1 mm.

Rohacell IG 51, 1 mm.

009074/01
Hardened acrylic foam (polymethacrylimide) with excellent mechanical properties, temperature resistance up to 180°C, white color, X-ray penetrable, and resistant to certain chemicals. Dimensions: 2500x1250 mm, Density: 51 kg/m3.
Kč1,236.20
Rozvodná síťka OM 70 - 180g/m2 š.650mm - zelená

Rozvodná síťka OM 70 - 180g/m2 š.650mm - zelená

eshop_900282
High porosity distribution mesh for optimal airflow and resin flow, recommended for vacuum or infusion technologies with polyester or epoxy. Available in INFUPLEX version for easy implementation, width 650mm.
Kč93.65
Rukávník (návlek na předloktí)

Rukávník (návlek na předloktí)

eshop_010203/1
Protect your work clothes and hands with this 55 cm long sleeve protector, ideal for preventing resin contact during laminating.
Kč22.39
Sekaná skelná vlákna 0,2 mm

Sekaná skelná vlákna 0,2 mm

eshop_002050
Very fine filler for epoxy and polyester resins with a grain size of 0.2mm. Enhances mechanical properties while maintaining transparency.
Kč385.99
Separační vosk TR 104 397g

Separační vosk TR 104 397g

eshop_002034
Quality wax-based separator, 397g. Suitable for higher temperatures. TR 104 can be replaced by TR 216. Not suitable as a base layer under PVA due to blooming.
Kč668.83
Separační základový vosk

Separační základový vosk

eshop_002028
Highly effective base wax for non-wettable surfaces like laminate molds and silicone. Improves wettability and creates a glossy release layer. Usable up to 100°C, suitable under PVA separator. Apply 3-6 layers on clean surfaces; renew after three releases for used molds. Available in 1 or 4 kg packaging.
Kč437.42
Separátor - FREWAX

Separátor - FREWAX

eshop_900043
Frewax is a wax and polymer-based separator that combines the ease of application with reusability. Shake before use, apply to a clean surface with a lint-free cloth, let dry for 5-10 minutes, and polish to a high gloss. Four layers are recommended.
Kč1,614.14
Separátor MAT ultra 41-90

Separátor MAT ultra 41-90

eshop_100020/1
MAT ultra 41-90 is a semi-permanent separator providing a matte finish on demolded parts. Apply 4-5 layers on a clean mold, drying for 15 minutes between layers and 30 minutes for full curing.
Kč2,377.65
Separátor PVA - ECO (po 1l)

Separátor PVA - ECO (po 1l)

eshop_002023/2
PVA Separator - ECO is a liquid product that prevents sticking between materials, ideal for separating composite and metal molds. It can be combined with a base wax and is applied with a sponge. Suitable for various applications.
Kč229.60
Separátor PVA - ECO modré (po 1l)

Separátor PVA - ECO modré (po 1l)

eshop_002023/3
PVA - ECO separator is a liquid product that prevents sticking of materials, ideal for separating composite and metal molds. It can be combined with a base wax and is suitable for almost all applications. Applied with a sponge, it is transparent blue in color.
Kč219.62
Separátor PVA - natírací R+G

Separátor PVA - natírací R+G

eshop_002024
Separator for epoxy, vinylester, and polyester resins up to 100°C. Use release wax for the primary layer. Apply with a brush (item no. 165 110). After drying, a shiny surface appears, and residues can be washed off with water.
Kč503.36
Separátor QV 5110 - Vantico

Separátor QV 5110 - Vantico

eshop_002032
Wax-based paste separator containing solvents for model building. Apply in a thin layer, let dry for 30 minutes, then polish. Suitable for molding up to 130°C.
Kč1,338.26
Home
Product added to wishlist
Product added to compare.

iqitcookielaw - module, put here your own cookie law text