Epoxidová pryskyřice L 285 (MGS)

High-quality resin for the aerospace industry and model manufacturing. The resin with hardener creates a very viscous mixture, allowing fibers to be quickly and thoroughly impregnated. As a result, the product has significantly lower weight and higher utility value. For detailed processing instructions, see the technical data sheets MGS. Recommended hardeners: H 500: mixing ratio 100:40 by weight or 100:50 by volume, processing time for 100g/25°C is approximately 10 min. H 285: mixing ratio 100:40 by weight or 100:50 by volume, processing time for 100g/25°C is approximately 50 min. H 286: mixing ratio 100:40 by weight or 100:50 by volume, processing time for 100g/25°C is approximately 90 min. H 287: mixing ratio 100:40 by weight or 100:50 by volume, processing time for 100g/25°C is approximately 180 min. Pigment pastes for epoxies can be used for coloring. Certified for the aerospace industry - documentation is always available. Hardeners can be mixed and combined before being added to the resin to create an optimal processing time for the specific product. Further necessary information can be obtained at http://www.momentive.com/ Original packaging of 30 and 240 kg. If you are interested in delivery in original packaging, please indicate this in your order.