Epoxidová pryskyřice LH 385

Epoxy resin LH 385 is characterized by low viscosity. The cured product is slightly flexible.

When cured with amines or polyamines, it offers high-quality application properties such as high mechanical strength,
good chemical resistance, excellent thermal properties, etc. It can also be used as an epoxy varnish with a suitable hardener.
This is a low-viscosity resin based on bisphenol A. Viscosity: 400-800 mPas/25 °C.
At normal storage temperatures, crystallization does not occur. A key advantage of the resin and recommended hardener mixture is its clarity.
Special properties: The resin remains clear even at temperatures of 0 - 10°C, without clouding as seen in some epoxy resins.                                    The resin with the hardener creates a low-viscosity system before lamination, allowing for good wetting while simultaneously expelling bubbles from the laminated
surface.
The working time (so-called pot life) ranges from approximately 15 minutes to about 5 hours depending on the hardener used.

Ideal hardeners are H 285, H 286, H 287, H 146, H 512