Čepy do forem dvojdílné 6/8 mm
Čepy do forem dvojdílné 6/8 mm

Čepy do forem dvojdílné 6/8 mm

Kč29.50
Tax included
A tool for joining laminated parts in molds with a thin final joint. Pins are set during mold production and secured with glass fibers. Provides a professional look and increases lifespan. Outer diameter of brass sleeve: 8 mm; steel pin diameter: 7.95 mm; total length: 20.65 mm.

Quantity Unit discount You Save
5 pair 24.38 Kč 29.5 Kč
10 pair 22.81 Kč 27.6 Kč
20 pair 22.02 Kč 26.65 Kč
30 pair 21.24 Kč 25.69 Kč
50 pair 20.45 Kč 24.74 Kč

Kalkulačka ceny produktu i


Vypočítat cenu
 

A great tool for joining laminated parts that are still in molds, where the final joint must be as thin as possible. The pins are set in the desired locations on the separating plane during the mold production and are secured against pull-out with thin glass fibers saturated with resin. A mold equipped with these simple pins gives the products a professional appearance while also increasing their own lifespan. One piece consists of two interlocking parts.

The outer diameter of the brass sleeve is 8 mm and the lower, cylindrical part of the steel pin is 7.95 mm. The length of the bushing is 8.20 mm, and the total length (bushing + pin) is 20.65 mm. The inner diameter of the brass sleeve is 5.97 mm, and the outer diameter of the steel pin is 5.95 mm.

eshop_010141
No reviews
Product added to wishlist
Product added to compare.

iqitcookielaw - module, put here your own cookie law text