Vakuovací pumpa P 3 (R +G)

P3 – VACUUM PUMP

German product, two-year warranty (excluding wear parts)

The pump is particularly suitable for evacuating larger areas, e.g. in aircraft construction.

Membrane vacuum pump and compressor (up to 4 bar *) in a portable design.

• With finely adjustable head and vacuum (pre-assembled)
• Precise evacuation, transport, and compression of air
• 100% oil-free compressed air
• Completely maintenance-free
• High continuous performance with quiet operation
• Long service life (> 5000 h)
• Suitable for continuous operation
• Can be operated from any standard household socket

* at higher pressure, the membrane may wear out faster

Areas of application :
For the production of oil-free compressed air and vacuum for evacuation, transport, and compression of gases. Support for measuring and analytical gases.

Technical specifications:

• Intake capacity at atmospheric pressure: max. 55 l / min. (3.3 m³ / h)
• Vacuum: max. 0.9 bar
• Maximum operating pressure: 4 bar
• Motor power (protection class IP 20): 300 W
• Power consumption: 1.5 A
• Connection: 230 V / 50 Hz
• Maximum allowable gas and ambient temperature: 40 ° C
• Weight: 11.3 kg
• Noise level: 61 dB (A)
• Aluminum pump head, membrane / neoprene / stainless steel valves.
• Hose connection suitable for pump hose R & G inside / outside 6 mm / 8 mm

Additional information
If vacuum pumps are operated in a location where the air is not dust-free, such as in a workshop where workpieces are simultaneously machined by grinding, it is recommended to equip vacuum pumps with a particle filter (Vacuum filter R & G / universal filter 390 105-1 / 390 108-1). Otherwise, there is a risk that dust or fine chips accumulate between the membranes in the vacuum pump, significantly reducing suction performance. In such cases, the pump must be returned to the manufacturer for repair. New membranes often need to be installed.