RELEASE AGENTS AND FILLERS

Showing 13-24 of 40 item(s)

Leštící pasta Oskar´s M-50 (1kg)

eshop_002039/4

Coarser polishing paste for molds and products, 1L per package.

Kč672.02

Mikrobalony odlehčené

eshop_002044

Microballoons are miniature hollow glass spheres used for thickening resins, allowing for larger applications without running. They increase resin volume without significantly affecting weight and help reduce reaction temperature during curing, preventing defects. Bulk density: 0.08 g/cm3, Density: 0.13 g/cm3.

Kč541.72

Mikrobalony standardní

eshop_002043

Microballoons are miniature hollow glass spheres used to thicken resins, allowing for application in larger quantities without running. They increase resin volume without significantly affecting weight and help reduce reaction temperature during curing, preventing defects.

Kč541.72

Mikroceluloza-prach - bílá

eshop_002041

A cost-effective filler for thickening all resins, ideal for applications requiring larger quantities without running. Mixes well with chopped glass fibers, aerosil, or microballoons. Fiber length: +/- 0.1 mm; Diameter: +/- 0.02 mm.

Kč218.88

Mleté skelné vlákno - moučka (bílá)

eshop_002069/4

Suitable as a filler for resins and for various applications.

Kč261.34

Náhradní pěnový moltopren pro PVA štětec

eshop_002026

Replacement foam for PVA brush.

Kč57.39

Orisil 200 (bal.10kg)- alternativa aerosilu

002042/12

Filler for epoxy and polyester resins that enhances mechanical properties and allows for the preparation of thixotropic resins. Available only in full packages.

Kč377.08

Sekaná skelná vlákna 0,2 mm

eshop_002050

Very fine filler for epoxy and polyester resins with a grain size of 0.2mm. Enhances mechanical properties while maintaining transparency.

Kč467.05

Sekaná skelná vlákna 6 mm

eshop_002053

Suitable as a filler for resins and for various applications.

Kč206.15

Separační vosk Oskar´s M-700/C

eshop_002038

Wax-based separator, 700g, suitable as a base layer for PVA separator.

Kč889.44

Separační vosk TR 104 397g

eshop_002034

Quality wax-based separator, 397g. Suitable for higher temperatures. TR 104 can be replaced by TR 216. Not suitable as a base layer under PVA due to blooming.

Kč809.28

Separační základový vosk

eshop_002028

Highly effective base wax for non-wettable surfaces like laminate molds and silicone. Improves wettability and creates a glossy release layer. Usable up to 100°C, suitable under PVA separator. Apply 3-6 layers on clean surfaces; renew after three releases for used molds. Available in 1 or 4 kg packaging.

Kč529.27