Epoxy and Polyester RESINS, HARDENERS AND GELCOATS

Showing 97-108 of 131 item(s)

Tužidlo H 145 (HAVEL)

eshop_111032

Mixing ratio 100:33, working time 50 min. Requires tempering to at least 50°C.

Kč579.78

Tužidlo H 146

eshop_111198

High-quality hardener for epoxy resins with a mixing ratio of 100:30 (LH 160, LH 145, LH 130). Working time: 50-60 min. Minimum curing temperature: 25 °C (recommended: 30 °C+).

Kč512.44

High-performance epoxy hardener LH 160 for certified parts, mixing ratio 100:25, 90 min working time, requires curing at 50°C. Achieves thermal resistance of 100°C with gradual curing up to 85°C for 8 hours. High quality with fewer harmful emissions.

Kč566.61

Tužidlo H 206C

eshop_111226

Hardener H 206C for casting epoxy resins, suitable for clear composites and laminations above 15°C. Non-brittle cured resin, no tempering needed. Higher thermal resistance achievable with post-curing at 50-60 °C. Working time approx. 2 hours. Low viscosity for perfect surface spreading. Ratio LH 206C : H 206C = 100:40.

Kč722.53

Tužidlo H 25

eshop_111067

Hardener H 25 is a replacement for P 11, offering higher strengths and no harmful vapors during processing. Suitable for Spolchemie and other epoxy resins. Thermal resistance with CHS 512 is 45-50°C, with a working time of approx. 100 minutes and a mixing ratio of 100:25 (by weight).

Kč629.30

Tužidlo H 282

eshop_112219/1

Cured PVC foam for sandwich structures with high thermal resistance. Size: 2150x1000 mm. Suitable for laminating with polyester, vinylester, or epoxy. High stiffness and low weight. Can be shaped in 2D and 3D at elevated temperatures. Specific weight: 80 kg/m3.

Kč433.37

View

Tužidlo H 285 HAVEL

eshop_111260/1

High-performance laminating resin and hardener system, suitable for composites with glass, carbon, and Kevlar fibers. Features excellent static and dynamic properties, with a recommended mixing ratio of 100:40 (epoxy to hardener). Pot life of approximately 50 minutes. Achieves glossy, non-sticky surfaces even in challenging curing conditions.

Kč737.91

Tužidlo H 286 HAVEL

eshop_111091

High-performance laminating resin and hardener system, suitable for composites with glass, carbon, and Kevlar fibers. Features excellent static and dynamic properties, with a recommended mixing ratio of 100:40. Initial curing at room temperature allows for processing after approximately 90 minutes. Achieves glossy, non-sticky surfaces even in challenging...

Kč702.77

Tužidlo H 287 HAVEL

eshop_111260

Laminating resin and hardener system, a direct replacement for MGS LR 285, suitable for composites with glass, carbon, and Kevlar fibers. High static and dynamic properties, meets glider and motor glider standards after curing at 50-55 °C. Requires 80 °C curing for motor aircraft. Mixing ratio 100:40 (epoxy:hardener), pot life 4-5 hours. Produces glossy,...

Kč1,057.08

Tužidlo H 289

eshop_111118/2

Liquid hardener for epoxy resins based on cycloaliphatic polyamine. Suitable for laminations above 15°C, with a working time of 30-60 minutes. Achieves higher thermal resistance with post-curing at 50-60°C. Low viscosity ensures quick fiber saturation. Ratio to resin LH 289 : H 289 = 100 : 33.

Kč742.30

Tužidlo H 300

eshop_111025

Fast hardener with reduced exotherm, high temperature resistance (approx. 90°C), and flexibility. Suitable for HAVEL and MGS epoxy resins. Recommended curing temperature: minimum 50°C. Mixing ratio: 100:25.

Kč934.10

Tužidlo H 330

eshop_111059

H 330 is an epoxy suitable for LH 330 with a mixing ratio of 100:40 by weight or 100:50 by volume. It has a gel time of 70 minutes at 25°C and thermal resistance of 50°C. The viscosity is 450 mPas/s. Ideal for coatings and surface treatments, especially on foam polystyrene.

Kč547.57