Shopping Cart
There are no more items in your cart
*Epoxy HAVEL*
Polyester resins and gelcoats
Glass fabrics
Yarn
Aeroglass
TAPES AND BRAIDS
Pigments
Home
Leštící pasta Oskar´s M-50 (1kg)
eshop_002039/4
Coarser polishing paste for molds and products, 1L per package.
Kč672.02
Mikrobalony odlehčené
eshop_002044
Microballoons are miniature hollow glass spheres used for thickening resins, allowing for larger applications without running. They increase resin volume without significantly affecting weight and help reduce reaction temperature during curing, preventing defects. Bulk density: 0.08 g/cm3, Density: 0.13 g/cm3.
Kč541.72
Mikrobalony standardní
eshop_002043
Microballoons are miniature hollow glass spheres used to thicken resins, allowing for application in larger quantities without running. They increase resin volume without significantly affecting weight and help reduce reaction temperature during curing, preventing defects.
Kč541.72
Mikroceluloza-prach - bílá
eshop_002041
A cost-effective filler for thickening all resins, ideal for applications requiring larger quantities without running. Mixes well with chopped glass fibers, aerosil, or microballoons. Fiber length: +/- 0.1 mm; Diameter: +/- 0.02 mm.
Kč218.88
Mleté skelné vlákno - moučka (bílá)
eshop_002069/4
Suitable as a filler for resins and for various applications.
Kč261.34
Sekaná skelná vlákna 0,2 mm
eshop_002050
Very fine filler for epoxy and polyester resins with a grain size of 0.2mm. Enhances mechanical properties while maintaining transparency.
Kč467.05
Sekaná skelná vlákna 6 mm
eshop_002053
Suitable as a filler for resins and for various applications.
Kč206.15
Separační vosk Oskar´s M-700/C
eshop_002038
Wax-based separator, 700g, suitable as a base layer for PVA separator.
Kč889.44
Separační vosk TR 104 397g
eshop_002034
Quality wax-based separator, 397g. Suitable for higher temperatures. TR 104 can be replaced by TR 216. Not suitable as a base layer under PVA due to blooming.
Kč809.28
Separační základový vosk
eshop_002028
Highly effective base wax for non-wettable surfaces like laminate molds and silicone. Improves wettability and creates a glossy release layer. Usable up to 100°C, suitable under PVA separator. Apply 3-6 layers on clean surfaces; renew after three releases for used molds. Available in 1 or 4 kg packaging.
Kč529.27