Shopping Cart
There are no more items in your cart
*Epoxy HAVEL*
Polyester resins and gelcoats
Glass fabrics
Yarn
Aeroglass
TAPES AND BRAIDS
Pigments
Home
Kč209.37
FMS - plnič pórů
eshop_002029/1
FMS is a mold pore filler suitable for polyester, epoxy, and other resins. It effectively fills pores in new and older molds, enhancing release properties when used with Frekote products. Applied at room temperature with a lint-free cloth, it requires 1-3 layers, each drying for 15-20 minutes.
Kč3,197.59
Foam 29 x 20 mm core for hockey stick repairs SRS
eshop_900135/2
Foam for hockey stick repairs, supplied in a length of 2 m.
Kč122.40
- -Kč293.84
Foaming agent EE 2 /HAVEL/ for epoxy foaming resins LH 100 and LH 128
111014
Foaming agent for LH 100 and LH 128 resin with a mixing ratio of 1-5% by weight. Achieve a bulk density of approximately 400 kg/m3 by adding 3%. Best mechanical properties are obtained by heating during or after curing at 50°C for 10 hours.
Kč3,134.31
Kč3,428.15
Time left
- -Kč1,067.22
Foaming Agent EP 50 /MGS/
001034
Mix foaming resins L 35, L 36, and L 40 in a ratio of 100:1 to 100:3 (max 100:5). Ensure thorough mixing, preferably mechanically.
Kč3,913.14
Kč4,980.36
Time left
Foaming SYSTEM 5 for hockey stick repair, component A
111247
Component A is a high-viscosity epoxy resin for foaming, while Component B is a hardener based on polyamines. The mixture creates a hard foam with excellent mechanical and chemical properties, stable at 50°C. Recommended mixing ratio is 100:3:6 (A:C:B). Curing time is 1-2 hours with a pot life of 15-30 minutes. Ideal for creating hard foam in amounts up...
Kč355.74