Epoxy and Polyester RESINS, HARDENERS AND GELCOATS

Showing 121-131 of 131 item(s)

Tužidlo H 538

eshop_111243

Hardener H 538 for epoxy resins, suitable for laminations above 15°C. Working time: 60-80 min. Recommended post-curing at 50°C for 3-5 hours for enhanced thermal resistance. Ratios: LH 385, 160, 260, 289, 288 to H 538 = 100:35. Gel time: 5-6 hours in 1mm layer.

Kč801.16

Tužidlo HV 2419

eshop_001075

Hardener for epoxy gelcoat Araldite SW 419-1 with a mixing ratio of 100:13 by weight.

Kč1,839.79

Tužidlo HY 2404

eshop_001053

Hardener for epoxy gelcoat Araldit SW 404 with a mixing ratio of 100:10 (by weight) and a working time of 25-30 minutes.

Kč1,672.59

Tužidlo L

eshop_001026

Hardener for resin L and EP gelcoats with a mixing ratio of 100:40 (by weight) and a working time of 40 minutes.

Kč989.00

Tužidlo REN HY 5159 pro RENGEL SW 56

eshop_001123/2

Hardener for molding gelcoat SW 56 with recommended dosage of hardener HY 5159 in a 100:10 ratio (by weight). Temperature resistant up to 120°C, with a processing time of 25-30 min at 25°C for 250ml.

Kč2,459.69

Tužidlo RIVERTABLE WWB

eshop_000034/1

Hardener for casting epoxy resin, ideal for creating casts up to 7cm thick, with excellent UV stability and clarity. Mixing ratio is 100:40 (epoxy:hardener). Maximum layer thickness is 9cm. Follow strict mixing guidelines for optimal results.

Kč723.27

Tužidlo VE 3261 (nyní EPH 161)

eshop_001076

Hardener for epoxy resin L 20 (100:25) or Gelcoat P (100:17). Processing time: 90 min. Curing: 24 h at room temperature, then 15 h at 60°C. See R+G handbook, p. 71 for details.

Kč975.09

Tvrdidlo P 11 do EP 512, 531 a 371

eshop_001040

Hardener P 11 is a flammable and corrosive liquid used for curing epoxy resins in construction and composite production. It features a low mixing ratio, reducing costs, and is suitable for laminating from 1 mm thickness. For thinner applications, thermal enhancement is recommended. Replaceable with hardeners H 20 or H 25.

Kč980.80

Urychlovač-kobalt pro vytvrzování polyesterových a vinylest.pryskyřic 1 %

eshop_000026

Accelerates the curing process of resins. Use 0.5-3% of the resin weight. Do not mix with catalyst (peroxide) to avoid dangerous reactions. Limited shelf life of 3 months at 20°C in a closed container.

Kč531.47

Vinylesterový gelcoat NORPOL GM 60014 H - zelený formovací

eshop_000020

Smooth and professional molds for beautiful products, suitable for polyester resin. Available in brush (H) or spray (S) application versions. Can be sanded, polished, and repaired easily. Recommended catalyst: peroxide K1 (1.3-2% by weight).

Kč691.79

Voskový roztok 9872 3%

eshop_000033

Top-coat resin for sealing laminate layers against UV and water. Cured resin does not stick and requires 1-3% wax solution. Sanding is necessary to avoid separation of additional layers.

Kč616.02